Author Topic: HUGE Lot of NOS Wico Balltops * SOLD OUT * (Read 8443 times)

ponyboy · « **on:** November 04, 2006, 09:41:44 am »

I have a HUGE lot of NOS Wico Balltops & Grommets.

I have the following:

3.5" Red, Blue, Black & Orange $.50 each

4.0" Pink & Lite Blue $.50 each

You must order the BallTops in lots of 25

Grommets $2.00 each *** SOLD OUT ***

Thanks,

PONYBOY sales@rollieelectronics.com

Timoe · « **Reply #1 on:** November 04, 2006, 10:58:56 am »

You better not stop selling these? You are the only source we know of and everyone knows that the sticks are the first part to rust and go "ugly" on a Wico.

ALL WICO OWNERS NEED YOUR HELP ponyboy

you cant stop selling these or the grommets

I need 8 of each but I wont be able to order for a week or two. Will you still maintain some stock?

NiteWalker · « **Reply #2 on:** November 04, 2006, 11:08:06 am »

I might get some if they fit happ comp sticks. Do they?

Grasshopper · « **Reply #3 on:** November 04, 2006, 05:37:43 pm »

Quote from: Timoe on November 04, 2006, 10:58:56 am

You better not stop selling these? You are the only source we know of and everyone knows that the sticks are the first part to rust and go "ugly" on a Wico.

ALL WICO OWNERS NEED YOUR HELP ponyboy

you cant stop selling these or the grommets

Agreed.

I've already got more balltops than bases, but If you put them on offer again, I'll buy a few more just for spares.

Kremmit · « **Reply #4 on:** November 04, 2006, 07:53:48 pm »

Quote from: NiteWalker on November 04, 2006, 11:08:06 am

I might get some if they fit happ comp sticks. Do they?

They fit Wico sticks and Happ P360s. Not Comps, Supers, or anything else that I know of.

NiteWalker · « **Reply #5 on:** November 04, 2006, 07:55:36 pm »

Thanks. It was worth a try I guess.

ponyboy · « **Reply #6 on:** November 04, 2006, 08:02:27 pm »

Thanks Kremmit. NiteWalker he is correct.

Timoe, I will not stop selling them as long as I have them.

Maybe someone on the forum would like to take them all and continue the sales.

Ponyboy

Timoe · « **Reply #7 on:** November 04, 2006, 10:16:21 pm »

You have a PM for 6 sticks

shardian · « **Reply #8 on:** November 04, 2006, 10:18:30 pm »

Quote from: Kremmit on November 04, 2006, 07:53:48 pm

Quote from: NiteWalker on November 04, 2006, 11:08:06 am
I might get some if they fit happ comp sticks. Do they?

They fit Wico sticks and Happ P360s. Not Comps, Supers, or anything else that I know of.

ummm...I put one in a generic 8-way joystick and it works fine...

Kremmit · « **Reply #9 on:** November 05, 2006, 09:47:21 am »

Quote from: shardian on November 04, 2006, 10:18:30 pm

Quote from: Kremmit on November 04, 2006, 07:53:48 pm
Quote from: NiteWalker on November 04, 2006, 11:08:06 am
I might get some if they fit happ comp sticks. Do they?

They fit Wico sticks and Happ P360s. Not Comps, Supers, or anything else that I know of.

ummm...I put one in a generic 8-way joystick and it works fine...

What's a "generic"? Pic?

shardian · « **Reply #10 on:** November 05, 2006, 03:59:35 pm »

8-way out of a SFII cab...

Timoe · « **Reply #11 on:** November 05, 2006, 04:05:06 pm »

That works because that is a Wico Microswitch joystick

Which is a nice stick by the way

Kremmit · « **Reply #12 on:** November 05, 2006, 07:56:18 pm »

Quote from: Timoe on November 05, 2006, 04:05:06 pm

That works because that is a Wico Microswitch joystick

Yup.

shardian · « **Reply #13 on:** November 05, 2006, 08:56:00 pm »

Oh. You learn something new every day then huh? There are no markings on that stick, so I didn't know.

ponyboy · « **Reply #14 on:** November 07, 2006, 08:13:05 pm »

4.0" Purple Balltops ( SOLD OUT )

Ponyboy

Luckydevil · « **Reply #15 on:** November 07, 2006, 08:54:37 pm »

For anyone interested, the light blue balltops take dye very well.

ponyboy · « **Reply #16 on:** November 11, 2006, 09:16:15 pm »

For anyone interested, the light blue balltops take dye very well.

...and I have plenty.

Ponyboy

ponyboy · « **Reply #17 on:** November 17, 2006, 03:42:05 pm »

Just added Jamma Harness

12.00 ea.

Thanks,

Ponyboy

ponyboy · « **Reply #18 on:** December 08, 2006, 07:02:09 pm »

I still have plenty left!!!!!!!!!!!!

Ponyboy

ponyboy · « **Reply #19 on:** December 17, 2006, 12:10:05 am »

ponyboy · « **Reply #20 on:** April 14, 2007, 01:07:47 pm »

I am moving and need to sell ASAP. Taking up too much space.

If you would like to order please send order to:

sales@rollieelectronics.com

Thanks,

Ponyboy

AlexC · « **Reply #21 on:** April 16, 2007, 11:04:50 am »

Email sent....

mountain · « **Reply #22 on:** April 16, 2007, 01:05:43 pm »

email order sent

Grasshopper · « **Reply #23 on:** April 23, 2007, 02:49:33 pm »

Email sent on the 18th April.

AlexC · « **Reply #24 on:** April 23, 2007, 05:32:11 pm »

Yeah I sent one on the 16th but got no reply. I guess he's moving...

Pac-Fan · « **Reply #25 on:** April 23, 2007, 05:49:53 pm »

I PM'ed last week and have not heard anything. Anyone know if these are JUST the balls themselves or is it the ball attached to the stainless steel shaft (ball or ball+shaft) that he is selling? Balltop to me implies just the ball, but I found a few other sites selling Wico excess stating ball+shaft's were being sold.

Can anyone who ordered clear this up for me before I place an order? Thanks!

SavannahLion · « **Reply #26 on:** April 23, 2007, 07:48:08 pm »

Oh Snarf, I'd like to order them too.

What does the pink color look like?

Would've liked to get the purples off him as well, oh well.

Kremmit · « **Reply #27 on:** April 23, 2007, 10:13:22 pm »

They are ball and shaft. Actuators, e-clips and the little tiny actuator springs were included as well, although it was hit and miss on getting the round leafswitch actuators or the square microswitch actuators. I picked up a batch a while back, and they are shiny and perfect.

ponyboy · « **Reply #28 on:** April 23, 2007, 10:34:00 pm »

Sorry for my late replies. I was in Las Vegas for a wedding.

Wico Grommets *** SOLD OUT ***

Plenty of Balltops!!!!!!!!!!

Thank you,

Ponyboy

MaximRecoil · « **Reply #29 on:** April 24, 2007, 03:17:57 am »

Quote from: ponyboy on April 23, 2007, 10:34:00 pm

Wico Grommets *** SOLD OUT ***

Damn it. Is there any other steady source for NOS Wico grommets? I meant to buy a few from Ponyboy but never got around to it. I don't own any Wico sticks currently but I'm sure I'll get a machine with Wico's eventually, and then I'll be kicking myself for not buying new grommets when I had the chance, the same way I still kick myself for not buying a few NOS LS-30's from videoconnect.com when they were $9 a pop, or even when they were $15 a pop. I was right on their page too back then thinking about buying a couple, but figured I'd do it later because I didn't own a machine that needed them at the time. And wouldn't you know it, now I own an Ikari Warriors machine...

Pac-Fan · « **Reply #30 on:** April 24, 2007, 10:51:54 am »

DANG IT!! I wanted (Needed) some grommets and was going to just order a few balltops as extra's. Now if the grommets are gone we have to succumb to the eBay gougers that want $10-$15 per grommet and $6 shipping PER grommet

DANG IT!!!!!! Missed it by *THAT MUCH*

ElKootcho · « **Reply #31 on:** April 24, 2007, 09:09:55 pm »

Quote from: ponyboy on November 11, 2006, 09:16:15 pm

For anyone interested, the light blue balltops take dye very well.

...and I have plenty.

Ponyboy

What is required to dye the ball top?

horseboy · « **Reply #32 on:** April 25, 2007, 10:42:04 am »

Quote from: ElKootcho on April 24, 2007, 09:09:55 pm

Quote from: ponyboy on November 11, 2006, 09:16:15 pm
For anyone interested, the light blue balltops take dye very well.

...and I have plenty.

Ponyboy
What is required to dye the ball top?

There is a thread about it somewhere, just do a quick search for it.

rockin_rick · « **Reply #33 on:** April 25, 2007, 11:26:44 pm »

Quote from: horseboy on April 25, 2007, 10:42:04 am

Quote from: ElKootcho on April 24, 2007, 09:09:55 pm
What is required to dye the ball top?

There is a thread about it somewhere, just do a quick search for it.

Since I just sought it out...

http://forum.arcadecontrols.com/index.php?topic=53733.0

Rick

horseboy · « **Reply #34 on:** April 26, 2007, 04:15:10 pm »

And another...

http://forum.arcadecontrols.com/index.php?topic=53107.msg526308#msg526308

Grasshopper · « **Reply #35 on:** May 02, 2007, 02:19:27 pm »

Email sent 29th April.

KDOG · « **Reply #36 on:** May 11, 2007, 09:04:54 pm »

email sent

ponyboy · « **Reply #37 on:** June 12, 2007, 01:31:32 pm »

I still need help moving these sticks.

I will knock the price down to $.50 ea. any mix in lots of 25

Thanks,

Ponyboy

AlexC · « **Reply #38 on:** June 12, 2007, 01:38:28 pm »

email sent

RetroACTIVE · « **Reply #39 on:** June 14, 2007, 05:06:05 pm »

email sent...


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: HUGE Lot of NOS Wico Balltops *** SOLD OUT *** (Read 8443 times)

Author Topic: HUGE Lot of NOS Wico Balltops * SOLD OUT * (Read 8443 times)