Wiring Coin Door Lights. Need connectors possibly?

[rdowdy95]

I have the over/under mini door system from Happ.  I was wondering.  I am using the Molex Connector method with some wire connectors.  Those twist on style like you see with a ceiling fan or over head ceiling lights.  I was needing to know though.....On the bulbs themselves.  The ones that come from happ.  Is there a way/connector to use to connect the wire to the bulb.  I have seen in some pictures an insulated style connector.  Could you use like a female quick disconnect connector or something like that.  I really don't want to solder wire to the bulb.

[Aurich]

To the bulb itself? Or the socket the bulb goes into? Quick disconnects should be just fine on the socket tabs, hopefully that's what you mean.

[fatfingers]

Quick disconnects is what I used.

[rdowdy95]

Thanks guys that was what I was thinking.  I have the .187 kind and the .25 kind so I will just see what fits better.

[fatfingers]

Mine were very small --- .100 I think?  I know I had to make a special run for new quick disconnects.

[AMDman13]

42-0351-00 Lamp Holder
From Happ ask Ponyboy. That's where I got mine.
These are sweet and use a standard 161 bulb which is 12v. These bulbs can easily be picked up at an auto parts store.