Author Topic: Canadian Members? (Read 4441 times)

Mark70 · « **on:** October 06, 2006, 05:56:14 pm »

I know that this is nearly spam, but I hope to find and build a closer canadian community of folks with this hobby.

A couple of guys have a really good forum at www.arcade4all.com. The homepage is no heck, but there is a lot of good info in the forums.

So if you're a canadian memeber and you face the same problems that we do, like duty on arcade parts from the USA, or distant suppliers, or a lack of shops/suppliers etc in your area, please drop by there and intro yourself to help discuss these problems.

Me? I'm in Ottawa (where the site is founded), which just happens to be the National Capital (for non Canadian readers.... and maybe a few Canadian readers

) I built my own cab from scratch and I used a Toronto suppler called Starburst Coin Machines as well as Andy from Ultimarc.

eccs19 · « **Reply #1 on:** October 06, 2006, 06:32:54 pm »

Most of the Canadian people into arcade machines, seem to hang out a www.cgcc.ca/forum

There are a couple on here that are also on that board. It's been around for a bit, and a lot of helpful / smart guys on there.

Grauwulf · « **Reply #2 on:** October 06, 2006, 07:33:37 pm »

CGCC is where I normally hang out as well. There is also a very active community at www.maaca.net as well, serving the Montreal and Ottawa area.

CheffoJeffo · « **Reply #3 on:** October 07, 2006, 09:24:05 am »

Same deal here ... I lurk at MAACA (and RGVAC and KLOV) and ocassionally stop by Arcade4All, but my normal haunts are here and CGCC. I live about 2 minutes North of Starburst in Toronto.

As far as customs and cross-border shipping goes, here is a invaluable reference:

http://www.cgcc.ca/forum/viewtopic.php?t=7594&sid=9269af3de0c2ab0bc78e44ba7d5dbcc0

Cheers.

BamBam · « **Reply #4 on:** October 07, 2006, 05:05:23 pm »

Mark70,

I am in Kemptville just south of you between Ottawa dn the U.S. border. Thanks for the links.

John

PacMon · « **Reply #5 on:** October 09, 2006, 11:11:45 am »

Hey Mark70:

To make you feel better, at least you're not up North like myself. I'm in Timmins, ON. It's about 9 hours North from Ottawa. There is very little up here for arcade\pinball parts. I found ordering online is the best way to go.

There is a premium to pay because of where we are (border fees, etc..), but I just think of it as an added cost of this hobby. There are some great trustworthy people online that cater to whatever you might need for this hobby, like Andy.

For your area, I would look up ccgc. I did read there are some people from the Ottawa area that post on that forum that might have spare parts or other stuff....

Scott84 · « **Reply #6 on:** October 10, 2006, 11:08:19 pm »

A trip to the Starburst Auction could be worth it if you guys rented a truck and shared the cost... you could pick up a lot of cheap cabinets to restore. Or even buy nicely restored cabs off people who attend from CGCC (if any are for sale of course)...

There are some people in the arcade part of the forum that are in Ottawa/Montreal i believe.

RayB · « **Reply #7 on:** October 11, 2006, 07:32:04 pm »

Hello.

BamBam · « **Reply #8 on:** October 12, 2006, 06:14:30 pm »

Quote from: PacMon on October 09, 2006, 11:11:45 am

Hey Mark70:

To make you feel better, at least you're not up North like myself. I'm in Timmins, ON. It's about 9 hours North from Ottawa. There is very little up here for arcade\pinball parts. I found ordering online is the best way to go.

There is a premium to pay because of where we are (border fees, etc..), but I just think of it as an added cost of this hobby. There are some great trustworthy people online that cater to whatever you might need for this hobby, like Andy.

For your area, I would look up ccgc. I did read there are some people from the Ottawa area that post on that forum that might have spare parts or other stuff....

You will always have Shania Twain

BamBam · « **Reply #9 on:** October 12, 2006, 06:18:00 pm »

How about this Ottawa gang? (http://www.cgcc.ca/)

Ottawa Classic Gaming Show Sunday 22 October 12-6pm (vendors arrive at 11am to set up their tables) Fenn Lounge, Carleton University (Residence Commons) 1233 Colonel By Drive Ottawa, ON . $5 general admission; $10 if you want a table. All proceeds from the event are going to Computers for Schools Ontario

PacMon · « **Reply #10 on:** October 13, 2006, 08:31:37 am »

Quote

You will always have Shania Twain

Small consolation!! We even built a museum for her. She officially opened it like 3 years after it opened. That was a good $$ million(s) investment.

Zakk · « **Reply #11 on:** October 13, 2006, 03:22:48 pm »

Hey that famous Zakk guy is Canadian.

jaydjay · « **Reply #12 on:** October 14, 2006, 12:30:41 pm »

Hi,

I am new here but have been lurking around this site for a few years now. Thanks for the links.

I am in the Kemptville area (South of Ottawa). It looks like BamBam and I are in the same area.

BamBam · « **Reply #13 on:** October 15, 2006, 12:24:58 pm »

Quote from: jaydjay on October 14, 2006, 12:30:41 pm

Hi,

I am new here but have been lurking around this site for a few years now. Thanks for the links.

I am in the Kemptville area (South of Ottawa). It looks like BamBam and I are in the same area.

Burritt's Rapids for me. How about you?

John

jaydjay · « **Reply #14 on:** October 15, 2006, 12:34:08 pm »

Fairly close since I am just down River Road from you. I am in the Oxford Landing / Settler's Grant area.

Jason

BamBam · « **Reply #15 on:** October 16, 2006, 06:41:41 pm »

Quote from: jaydjay on October 15, 2006, 12:34:08 pm

Fairly close since I am just down River Road from you. I am in the Oxford Landing / Settler's Grant area.

Jason

I was beginning to wonder if there was any others like me

in the area

I am on River Road too. Just east of the locks.

John

jaydjay · « **Reply #16 on:** October 16, 2006, 08:01:07 pm »

Cool. Less than 10 kms away from me then. I am only in the planning stages right now for my cabinet and starting to gather pieces for it.

Jason

BamBam · « **Reply #17 on:** October 17, 2006, 10:09:56 am »

Quote from: jaydjay on October 16, 2006, 08:01:07 pm

Cool. Less than 10 kms away from me then. I am only in the planning stages right now for my cabinet and starting to gather pieces for it.

Jason

Good luck with your project. You are at the right place for help.
You may want to consider tracking down Canadian suplliers for the arcade goodies as Canada Customs hammers you when they ship supplies across the border.

GGKoul · « **Reply #18 on:** October 17, 2006, 03:17:27 pm »

HI!! Oskee Wee Wee to you all!

(+_+) · « **Reply #19 on:** October 17, 2006, 04:14:51 pm »

Born and raised in Montreal, QC. I feel like breaking into song.

Oh Canada...

Gee, how does it go again.

GGKoul · « **Reply #20 on:** October 18, 2006, 12:43:01 pm »

Quote from: (+_+) on October 17, 2006, 04:14:51 pm

Born and raised in Montreal, QC. I feel like breaking into song.

Oh Canada...

Gee, how does it go again.

O Canada, terre de nos a

menace · « **Reply #21 on:** October 19, 2006, 03:15:40 pm »

I hail from burlington myself but after building 6 cabs of various sizes and incarnations, I mostly lurk here and cgcc and see what spicey rumours are flying

So who has herpes again?

Mark70 · « **Reply #22 on:** October 19, 2006, 08:15:54 pm »

For all of you guys near Ottawa, I went to the MAACA meet on October 14. Those guys had about 30 pins set up. There were a couple of vids. They go all out. The event centers arounda pinball tournament. They did a couple of pizza runs.

Sales of vids and pins go on before, on the MAACA boards, and during. Plenty of purchase opportunities. Some guys sold machines before then brought them to the meet.

Check it out. Especially you guys who are close to Ottawa, in Kemptville.

BamBam · « **Reply #23 on:** October 20, 2006, 06:55:25 pm »

Quote from: Mark70 on October 19, 2006, 08:15:54 pm

For all of you guys near Ottawa, I went to the MAACA meet on October 14. Those guys had about 30 pins set up. There were a couple of vids. They go all out. The event centers arounda pinball tournament. They did a couple of pizza runs.

Sales of vids and pins go on before, on the MAACA boards, and during. Plenty of purchase opportunities. Some guys sold machines before then brought them to the meet.

Check it out. Especially you guys who are close to Ottawa, in Kemptville.

It's too bad they didn't post about the event so we all knew about it.

CheffoJeffo · « **Reply #24 on:** October 21, 2006, 08:38:08 am »

Quote from: BamBam on October 20, 2006, 06:55:25 pm

It's too bad they didn't post about the event so we all knew about it.

They did ... on the MAACA boards

www.maaca.org

Cheers


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news