Author Topic: Berzerk Bezel Questions (Read 18486 times)

More Cowbell · « **on:** October 06, 2006, 01:01:37 pm »

I need a Berzerk Bezel for the cabinet that I am refurbishing.
1) Does anyone have one that they are willing to part with?
2) Does anyone have a high res image of it?
2a) Can Kinko's print something like this on cardboard or some kind of thick paper at that large of a size? How high of resolution would I need for it to come out decent?

Ad_Enuff · « **Reply #1 on:** October 06, 2006, 01:44:00 pm »

Quote from: More Cowbell on October 06, 2006, 01:01:37 pm

I need a Berzerk Bezel for the cabinet that I am refurbishing.
1) Does anyone have one that they are willing to part with?
2) Does anyone have a high res image of it?
2a) Can Kinko's print something like this on cardboard or some kind of thick paper at that large of a size? How high of resolution would I need for it to come out decent?

Yes I have it, well actually the MAME Artwork Project has it. It currently hasnt been scanned yet.

More Cowbell · « **Reply #2 on:** October 06, 2006, 02:06:28 pm »

Cool.

Any estimate on timing of getting it scanned? No rush, just hurry the hell up.

Ad_Enuff · « **Reply #3 on:** October 06, 2006, 02:09:57 pm »

Quote from: More Cowbell on October 06, 2006, 02:06:28 pm

Cool.
Any estimate on timing of getting it scanned? No rush, just hurry the hell up.

Contact Mr Do! on the MAMEWORLD forums and ask if he can put it at the front of the queue?

http://www.mameworld.info/ubbthreads/ubbthreads.php?Cat=&C=3

Mr. Do · « **Reply #4 on:** October 06, 2006, 02:24:42 pm »

Quote from: More Cowbell on October 06, 2006, 02:06:28 pm

Cool.
Any estimate on timing of getting it scanned? No rush, just hurry the hell up.

Assuming things go as they should, I'll have it scanned this weekend.

More Cowbell · « **Reply #5 on:** October 06, 2006, 02:48:14 pm »

I repeat...

and again...

More Cowbell · « **Reply #6 on:** November 20, 2006, 11:47:34 am »

Any update on this? I still don't see it out there on the MAMEWORLD forums.
Thanks

Ad_Enuff · « **Reply #7 on:** November 20, 2006, 01:55:46 pm »

Quote from: More Cowbell on November 20, 2006, 11:47:34 am

Any update on this? I still don't see it out there on the MAMEWORLD forums.
Thanks

First of all, please feel free to post on the MAME Artwork Forum to check whats going on.

I currently have a SCAN of the Bezerk Bezel (Please see attached)

You will notice the quality is very poor due to the bezels age.

I am currently cleaning it....I'll post under neath my current WIP.

Ad_Enuff · « **Reply #8 on:** November 20, 2006, 01:58:27 pm »

Here is my current WIP.....due to so much bezel damage its taking its time.

jcroach · « **Reply #9 on:** November 20, 2006, 03:51:26 pm »

Looking great!

More Cowbell · « **Reply #10 on:** November 20, 2006, 05:27:50 pm »

Fantastic work, Ad_Enuff. Will this eventually wind up on the Arcade Art Library site?

Ad_Enuff · « **Reply #11 on:** November 20, 2006, 05:31:45 pm »

Quote from: More Cowbell on November 20, 2006, 05:27:50 pm

Fantastic work, Ad_Enuff. Will this eventually wind up on the Arcade Art Library site?

What I'm doing is cleaning and restoring the raster scan at teh moment as teh bezel has tons of damage all over it, although from my WIP images you probably cant see it...but beleive me its there alright!

Once complete, Zorg wants to Vectorise it and at that point it will be posted on AAL.

Just be as patient as possibel with this one, unless of course a better bezel comes along that doesnt need as much work on it.

usedelectronics · « **Reply #12 on:** November 21, 2006, 02:33:44 am »

I just picked up a bezerk with a extremely nice bezel..
I'd be happy to help, but don't have a scanner.

Any suggestions?

Ad_Enuff · « **Reply #13 on:** November 21, 2006, 05:36:07 am »

Quote from: usedelectronics on November 21, 2006, 02:33:44 am

I just picked up a bezerk with a extremely nice bezel..
I'd be happy to help, but don't have a scanner.

Any suggestions?

Where are you? If its possible to send it to Mr Do! or Aaron Giles for scanning that would be the best solution.

Unless you know someone that has a photo quality scanner or perhaps even a local print shop that has facilities to scan large objects...

Ad_Enuff · « **Reply #14 on:** November 21, 2006, 07:10:06 pm »

Here's another update.....

More Cowbell · « **Reply #15 on:** November 22, 2006, 09:58:34 am »

Ad_Enuff · « **Reply #16 on:** November 22, 2006, 11:28:57 am »

Or how about a animated GIF version...original raw scan and my current WIP!

Still work to do but its getting close to finishing!

More Cowbell · « **Reply #17 on:** November 22, 2006, 12:12:29 pm »

We live in awesome times. Everything old is new again. Nice work.

More Cowbell · « **Reply #18 on:** December 07, 2006, 06:22:41 pm »

Ad_Enuff, did you get that bezel in the mail to me yet?

How's it going?

Ad_Enuff · « **Reply #19 on:** December 07, 2006, 06:57:13 pm »

Quote from: More Cowbell on December 07, 2006, 06:22:41 pm

Ad_Enuff, did you get that bezel in the mail to me yet?
How's it going?

I'm juggling lots of bezels at the moment for the MAME Artwork Project. Midway's Space Invaders and Ms Pac-Man were the MAJOR titles, then worked on Armour Attack, Shark Attack, Kosmik Krooz'r, Carnival, Robby Roto and I'm still working on Mouse Trap and of course the Berzerk Bezel! Phew!

I'll get back to it fairly soon......and I'll post an update.

More Cowbell · « **Reply #20 on:** January 05, 2007, 01:29:42 pm »

Just bumping this up to check on status.

Ad_Enuff · « **Reply #21 on:** January 05, 2007, 01:49:50 pm »

Quote from: More Cowbell on January 05, 2007, 01:29:42 pm

Just bumping this up to check on status.

MC,

Work has stopped as Mr Do! says he has found a far far better source for the Berzerk bezel. Mr Do! Ya could of done that ages ago ! wink wink!

LOL!

Anyway, thats why I have stopped currently.....

Mr Do! BTW has a PC problem in the sense his PC died on him.....he's currently rebuilding a NEW one.....so I wont get the NEW scan until that happeens.

More Cowbell · « **Reply #22 on:** January 05, 2007, 05:57:33 pm »

Thanks for the update. Godspeed, Mr. Do, Godspeed.

More Cowbell · « **Reply #23 on:** February 27, 2007, 11:33:29 am »

Hey guys. Any word on the Berzerk bezel scan status?

rikitiki · « **Reply #24 on:** February 28, 2007, 10:19:38 am »

would like to help reproduce this bezel
reverse screenprinted plex
is it possible to get the original high res scan?
Richard
Thisoldgame.com

Mr. Do · « **Reply #25 on:** February 28, 2007, 10:51:31 am »

Ad_Enuff is still working on it. From looks of the last WIP, it is almost there:

http://www.mameworld.info/ubbthreads/showthreaded.php?Cat=&Number=102186&page=&view=&sb=5&o=&fpart=1&vc=1

More Cowbell · « **Reply #26 on:** February 28, 2007, 05:14:31 pm »

Wow! Looking nice. Thanks for the update.
Rikitiki, I emailed you about this yesterday. Small world.

rikitiki · « **Reply #27 on:** February 28, 2007, 05:30:46 pm »

Too funny

if I can get the orginal full size scan I can prepare a layout so I could do a screenprinted run on plex this clean up version for mame is too small to work with.
Game oN!
Richard

menace · « **Reply #28 on:** March 05, 2007, 02:08:57 pm »

Add my name to list of guys eagerly anticipating a berzerk bezel for WIP's--Thanks for the great effort so far!

Ad_Enuff · « **Reply #29 on:** March 06, 2007, 01:03:40 am »

I'm busy trying to get work done and I'm currently talking a breather due to life issues etc.

I'm still trying to get stuff done, but my time I devote to the MAME Artwork Project has really taken a dive....

It disapoints me as much as everyone else....

More Cowbell · « **Reply #30 on:** March 06, 2007, 12:17:35 pm »

Quote from: Ad_Enuff on March 06, 2007, 01:03:40 am

I'm busy trying to get work done and I'm currently talking a breather due to life issues etc.

I'm still trying to get stuff done, but my time I devote to the MAME Artwork Project has really taken a dive....

It disapoints me as much as everyone else....

Understandable, Ad_Enuff. Real life gets in the way of our gaming fun all too often. No disappointment here, just anticipation. Without guys like you taking the lead to get stuff done, no stuff would get done. Thanks for your hard work!

More Cowbell · « **Reply #31 on:** April 05, 2007, 11:58:43 am »

Just checking in to see if there are any updates or anyone who knows where to get one of these precious precious bezels.

narf · « **Reply #32 on:** April 11, 2007, 10:31:50 am »

hey im a OZ noobie and this is my first post on here but i have been lurking but never joined

ive actually got 3 of these bezels (2 used and 1 practically NOS) i bought a cab of a guy and he chucked em in for me to chop down to fit it but i couldnt bear to cut down some cool looking artwork the owner thought they were generic. He had them sitting for years on the floor of his shed along with heaps of others and 7 new space invaders bezels all with the paper on the back never been used (taito ones)

was wondering how much are these worth and do you have the dimesions of the size you need i may be able to assist

More Cowbell · « **Reply #33 on:** April 11, 2007, 10:51:40 am »

Hey Narf,
Do you have any pics? I can measure tonight but I'm guessing if they are from Berzerk cabs they will be the right size. Are they glass or plexi? Not sure what they're worth on the open market (especially in OZ as I am in the US) but I would be willing to pay up to $75 shipped for the nice one.
Thanks for the response.

narf · « **Reply #34 on:** April 11, 2007, 11:22:31 am »

hey ive got 2 in plexi and a smaller one in glass i guess only difference being that these are a LIA branded (lesuire industries australia) on em ill take some pics asap

More Cowbell · « **Reply #35 on:** April 13, 2007, 10:50:26 am »

Hey Narf, my bezel area measures 23" wide by 20" high. Do any of your bezels match that closely?

More Cowbell · « **Reply #36 on:** May 04, 2007, 10:57:02 am »

Just raising this back up the flagpole to see who salutes.

Mr. Do · « **Reply #37 on:** May 07, 2007, 02:35:28 am »

Quote from: More Cowbell on May 04, 2007, 10:57:02 am

Just raising this back up the flagpole to see who salutes.

Just waiting on Addy...he's had personal things to attend to the last couple months.

menace · « **Reply #38 on:** October 06, 2007, 10:11:53 am »

Just reviving a "dead" thread here--any more updates on the bezel? Anyone have a rough scan? and i'll vectorize it myself rather than waiting on people who have a zillion other things going on....

Mr. Do · « **Reply #39 on:** October 08, 2007, 09:52:26 am »

Quote from: menace on October 06, 2007, 10:11:53 am

Just reviving a "dead" thread here--any more updates on the bezel? Anyone have a rough scan? and i'll vectorize it myself rather than waiting on people who have a zillion other things going on....

It's not being busy that's the problem; it's that the person that's 98% done with it hasn't had a working computer for a few months. Once that gets resolved, we'll be back on track.

menace · « **Reply #40 on:** October 08, 2007, 12:44:47 pm »

Ah ok--I thought it was a case of real life getting in the way and the project stalling as a result--glad to hear its still progressing (albeit eventually)

sacolton · « **Reply #41 on:** March 12, 2008, 02:11:20 pm »

I remember that bezel because I made one. Many many many years ago I scanned my
original Berzerk bezel and cleaned it up for the MAME team and then submitted a high
resolution version later. I also did the Venture bezel too. I'll have to look through my
archive and see if I have the original scan. Nice to see there is still an interest in the
restoration and development of Berzerk.

Steve · « **Reply #42 on:** March 12, 2008, 05:34:01 pm »

I'm also after the artwork for Bezerk

Great old game

Luigi · « **Reply #43 on:** April 08, 2008, 04:33:19 am »

Since there is really bad chance to get a Berzerk cab here in Germany I'd like to turn a generic cab into a Berzerk. At localarcade is the cpo and the sideart.

What's missing is the bezel and marquee and they have to be modified for the size fo the generic cab.....would be great if the bezel work would be finished

Luigi · « **Reply #44 on:** April 17, 2008, 08:08:54 am »

BUMP for Ad to solve his "not-working-PC" problem and finishin the Berzerk bezel

sacolton · « **Reply #45 on:** April 18, 2008, 04:39:49 pm »

I still have my original BERZERK bezel ... currently in use.

It's in mint condition too.

Mr. Do · « **Reply #46 on:** April 19, 2008, 04:34:20 pm »

Quote from: sacolton on March 12, 2008, 02:11:20 pm

I remember that bezel because I made one. Many many many years ago I scanned my
original Berzerk bezel and cleaned it up for the MAME team and then submitted a high
resolution version later. I also did the Venture bezel too. I'll have to look through my
archive and see if I have the original scan. Nice to see there is still an interest in the
restoration and development of Berzerk.

So any chance you still have the scan, or the or the high-res version? What's holding it up right now is both scans I have are pretty rough.

sacolton · « **Reply #47 on:** April 21, 2008, 04:51:00 pm »

I'll dig out the archives and check.

Luigi · « **Reply #48 on:** April 22, 2008, 02:20:21 am »

Quote from: sacolton on April 21, 2008, 04:51:00 pm

I'll dig out the archives and check.

GREAT

Luigi · « **Reply #49 on:** April 22, 2008, 05:21:04 am »

btw....is there a good scan of the Berzerk marquee available??? In order to turn my generic cab into a Berzerk I will have to customize the marquee, too

sacolton · « **Reply #50 on:** April 24, 2008, 04:27:15 pm »

No luck so far. I'll probably have to re-scan it again.

Luigi · « **Reply #51 on:** May 09, 2008, 02:54:22 am »

BUMP it up

Luigi · « **Reply #52 on:** July 21, 2008, 01:55:44 am »

[sigh]

Is anybody in contact with Ad_Enuff and could ask him if there is a chance that thing will be finished some day??

Maybe he could share his work and somebody else (me) could try to finish it.....

Mr. Do · « **Reply #53 on:** July 22, 2008, 01:09:01 am »

Quote from: Luigi on July 21, 2008, 01:55:44 am

[sigh]

Is anybody in contact with Ad_Enuff and could ask him if there is a chance that thing will be finished some day??

Maybe he could share his work and somebody else (me) could try to finish it.....

If he wanted to, he would have given it to me by now.

If "sacolton" can find his scan, that will probably work out, as his looks a lot better.

Luigi · « **Reply #54 on:** July 22, 2008, 02:06:39 pm »

Sacolton can't find his scan anymore...he will have to do a rescan in a shop and he wanted to see how much it costs.

Ad_enuff did a good job so far, it would be stupid if one had to do all that work again

Ad_Enuff · « **Reply #55 on:** October 13, 2008, 05:19:21 pm »

The bezel is complete and fully restored to its former glory!

Obviously the attached picture is only a small version and thumbnail of sorts. The one that will be added to MAME Artwork Project will be 4000 pixels wide with a resolution of 300dpi which is suitable for printing. However the scan I have at home in Photoshop still is even bigger, being 6000 pixels or something in that region.

Luigi · « **Reply #56 on:** October 21, 2008, 10:09:43 am »

YIPPIIIEEEE !!

Where and when can I get the large version??

Ad_Enuff · « **Reply #57 on:** October 21, 2008, 01:37:00 pm »

Quote from: Luigi on October 21, 2008, 10:09:43 am

Where and when can I get the large version??

The full version is on Mr Do!'s website like all the MAMEdev Artwork Project work is:

http://www.mameworld.net/mrdo/mame_artwork.html

ChadTower · « **Reply #58 on:** October 21, 2008, 01:44:46 pm »

Wish I had seen this earlier... I have my Berzerk bezel out on a table, have for a couple weeks, waiting for me to Triple Thick it.

Luigi · « **Reply #59 on:** October 21, 2008, 04:43:50 pm »

Quote from: Ad_Enuff on October 21, 2008, 01:37:00 pm

Quote from: Luigi on October 21, 2008, 10:09:43 am
Where and when can I get the large version??

The full version is on Mr Do!'s website like all the MAMEdev Artwork Project work is:

http://www.mameworld.net/mrdo/mame_artwork.html

Thanks mate...it's simply awesome !!

Luigi · « **Reply #60 on:** March 26, 2009, 03:22:18 pm »

Finally attached the printed bezel to the new glass. Thanks for making this...awesome work dude!!!

Ad_Enuff · « **Reply #61 on:** July 20, 2009, 10:04:58 am »

I keep meaning to say, this is what the MAME Artwork project is all about. Bringing life back to old classic machines. Seeing this repro restoration, really makes me very happy seeing it restored.

Even if I do say so myself!


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news