Author Topic: CPO question (Read 2378 times)

sfrascella · « **on:** October 05, 2006, 01:22:06 pm »

I am getting ready to do my CPO and was wondering if there is anything I should do to prep the surface before I apply the artwork. I used mdf for the CP, and plan on using the laminated adhesive backed material from Mamemarquees.

Thanks

the_77x42 · « **Reply #1 on:** October 07, 2006, 01:46:16 am »

You need to prime it first. Be sure to wait at least two days to let the primer cure. Don't be afraid to do two coats.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: CPO question (Read 2378 times)

sfrascella

CPO question

the_77x42

Re: CPO question