Author Topic: Power to the P360 (Read 1023 times)

sol · « **on:** September 22, 2006, 12:14:44 am »

I have a question in relation to the 5v on the interface boards. How many P360 joysticks can be run off one of these.

Cheers

leapinlew · « **Reply #1 on:** September 22, 2006, 11:24:20 am »

Are you talking about the Ipac? If so, I've heard from several reliable sources (including RandyT at Groovy Game Gear) that you should not use the 5v off the ipac.

The power supply on your computer provides 5v power that many people use. Other people cut a wall wart that outputs 5v to provide the power to the p360's.

If not ipac, could you be more descriptive?

sol · « **Reply #2 on:** September 22, 2006, 09:01:19 pm »

Thanks. yes it was an IPAC.
Iis there a description anywhere how to get it from your computers power supply, if using the computers power supply can you hook up more than 1 p360.

Cheers

rdagger · « **Reply #3 on:** September 22, 2006, 10:32:43 pm »

I'm running 3 P360's, 3 illuminated volcano buttons and a rotary interface off of my IPAC 5V. It's been 2 years and no problems.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Power to the P360 (Read 1023 times)

sol

Power to the P360

leapinlew

Re: Power to the P360

sol

Re: Power to the P360

rdagger

Re: Power to the P360