Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Tubular cam locks  (Read 1306 times)

0 Members and 1 Guest are viewing this topic.

SuperNole

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 11
  • Last login:November 01, 2007, 06:29:27 pm
Tubular cam locks
« on: August 13, 2006, 10:56:34 pm »
I want to replace the tubular cam locks in my Capcom Impress.  When I bought it all but 2 were missing and the 2 didn't have the keys to them.  Do I need 5/8" or 7/8" locks?
Logged

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: Tubular cam locks
« Reply #1 on: August 14, 2006, 12:12:39 am »
In the late 1980's the A.M.O.A. standardized all coin door locks would be 7/8" long.
Logged

SirPeale

  • Green Mountain Man
  • Global Moderator
  • Trade Count: (+23)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 12963
  • Last login:August 04, 2023, 09:51:57 am
  • Arcade Repair in New England
    • Arcade Game and Other Coin-Op Projects
Re: Tubular cam locks
« Reply #2 on: August 14, 2006, 10:18:17 am »
He didnt' specify coin door, and IIRC the cab has locks all over it to get it apart.
Logged

grueinthebox

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 427
  • Last login:February 07, 2014, 12:37:03 pm
  • Feed your head.
    • red42.com
Re: Tubular cam locks
« Reply #3 on: August 14, 2006, 10:51:33 am »
Impress is a Japanese candy cab, if I'm not mistaken.  I would guess it's going to have 5/8 locks.  You should be able to take one of the locks that's present, measure it, then see if it's going to work in all the other locations as well.  You'll need to remove it to replace anyway, may as well do it now and use it to test.  I would imagine all the locks will be the same length.
Logged
"All right. It's Saturday night. I've got no date, a two liter bottle of Shasta, and my all Rush mix tape. Let's rock!"

SuperNole

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 11
  • Last login:November 01, 2007, 06:29:27 pm
Re: Tubular cam locks
« Reply #4 on: August 15, 2006, 10:53:02 pm »
They are 5/8".  Thanks guys.
Logged

Havok

  • Keeper of the __Blue_Stars___
  • Trade Count: (+17)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4530
  • Last login:Yesterday at 11:47:56 pm
  • Insufficient facts always invite danger.
Re: Tubular cam locks
« Reply #5 on: August 16, 2006, 12:42:16 pm »
Get them from RichardP here on the board, he has an ebay store and gives BYOAC members free shipping. I am a satisfied customer...   :applaud:

http://forum.arcadecontrols.com/index.php?topic=47626.0
Logged

SuperNole

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 11
  • Last login:November 01, 2007, 06:29:27 pm
Re: Tubular cam locks
« Reply #6 on: August 16, 2006, 07:36:21 pm »
Quote from: Havok on August 16, 2006, 12:42:16 pm
Get them from RichardP here on the board, he has an ebay store and gives BYOAC members free shipping. I am a satisfied customer...   :applaud:

http://forum.arcadecontrols.com/index.php?topic=47626.0

I did buy them from him on eBay.  Didn't know he was a member here or about the free shipping.  I'm still new here. :-[
Logged
Pages: [1]
  
Go Up
« previous next »