Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Any AZ BYOACers want to help me out?  (Read 2766 times)

0 Members and 1 Guest are viewing this topic.

Banacek

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 294
  • Last login:November 08, 2017, 05:01:31 pm
Any AZ BYOACers want to help me out?
« on: July 25, 2006, 02:35:26 pm »
Hey guys, I'm looking for help cutting the holes in my CP and the Plexiglass I'm going to put over it. The thing is, I'm an ASU student and I really don't have any tools out here with me. Basically, I'm trying to avoid having to buy a drill and a router. If anyone out there is in the area and is willing to help me out, there's a cold 6-pack in it for you. :) Thanks in advance!

(I know ASU has a wood shop, but I have no idea if they'd let me into it. I'm not a art student.)

leapinlew

  • Some questionable things going on in this room with cheetos
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7919
  • Last login:July 27, 2025, 11:06:50 am
Re: Any AZ BYOACers want to help me out?
« Reply #1 on: July 25, 2006, 03:47:53 pm »
first off - you want a drill. You'll use it the rest of your life. I can understand the router. I tell you what though - I use the hell out of mine. Been the surprise tool for me.

Second - this is art! They should let you do it!

shardian

  • Saint is the evil mastermind
  • Trade Count: (+23)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 9218
  • Last login:August 21, 2015, 03:11:31 pm
  • Friends don't let friends build frankenpanels...
Re: Any AZ BYOACers want to help me out?
« Reply #2 on: July 25, 2006, 03:54:26 pm »
My college had some crazy liability thing that you pretty much weren't supposed to be in any classroom that you were not currently enrolled to be in. You definitely want to check if it is ok for you to be there, even if you find a student who has access.

shardian

  • Saint is the evil mastermind
  • Trade Count: (+23)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 9218
  • Last login:August 21, 2015, 03:11:31 pm
  • Friends don't let friends build frankenpanels...
Re: Any AZ BYOACers want to help me out?
« Reply #3 on: July 25, 2006, 03:55:35 pm »
Oh.. flea markets and rummage sales are great places to find tools dirt cheap if you are short on funds. I got a drill at a flea market for $1 and it works great.

Banacek

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 294
  • Last login:November 08, 2017, 05:01:31 pm
Re: Any AZ BYOACers want to help me out?
« Reply #4 on: July 25, 2006, 04:52:40 pm »
Oh, I know that I need a drill. I guess it's about time to bite the bullet on that. A router, on the other hand, I really can't justify. And I didn't want someone to do it for me. I figured I swing on over and we'd work on it with your tools  ;D

Maverick

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 15
  • Last login:August 09, 2006, 09:53:19 pm
Re: Any AZ BYOACers want to help me out?
« Reply #5 on: July 25, 2006, 06:21:09 pm »
Well you could rent them at the Home Depot.

Banacek

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 294
  • Last login:November 08, 2017, 05:01:31 pm
Re: Any AZ BYOACers want to help me out?
« Reply #6 on: July 25, 2006, 08:57:33 pm »
Well, I took a trip to Harbor Freight and got what I need. The only thing I can't seem to find was a 3/32-inch 3 wing slot cutter.

leapinlew

  • Some questionable things going on in this room with cheetos
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7919
  • Last login:July 27, 2025, 11:06:50 am
Re: Any AZ BYOACers want to help me out?
« Reply #7 on: July 25, 2006, 09:20:42 pm »
Well, I took a trip to Harbor Freight and got what I need. The only thing I can't seem to find was a 3/32-inch 3 wing slot cutter.

Good for you!

As for the 3 wing slot cutter - a 1/16" one from MLCS works good. Do yourself a favor and get a flush trim bit as well.

http://www.mlcswoodworking.com/

Banacek

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 294
  • Last login:November 08, 2017, 05:01:31 pm
Re: Any AZ BYOACers want to help me out?
« Reply #8 on: July 25, 2006, 10:58:32 pm »
Good for you!

As for the 3 wing slot cutter - a 1/16" one from MLCS works good. Do yourself a favor and get a flush trim bit as well.

http://www.mlcswoodworking.com/

What do I need the flush trim bit for?

leapinlew

  • Some questionable things going on in this room with cheetos
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7919
  • Last login:July 27, 2025, 11:06:50 am
Re: Any AZ BYOACers want to help me out?
« Reply #9 on: July 25, 2006, 11:11:08 pm »
The flush trim bit is good for a couple things. It's great for cutting plexi. If you plan on using plexi for your marquee or control panel. Also, it's great to cut out patterns you already have. Here is a picture of me cutting with the flush trim bit. What I've done is create what I wanted to cut and used this bit to trace around and create an exact. This is very useful when cutting the sides of your cabinet - you cut 1 side and trace the other with this bit.

 

Now, if you already have both sides cut and have no need for cutting identical peices - using it to cut the control panel is a good clean way to cut holes in your plexi. You can read my project announcement to see how I used it. While I'm waiting on parts, I documented the cutting of my CP plexi.

http://forum.arcadecontrols.com/index.php?topic=55021.0

If you still decide you don't need a flush trim router bit. Thats fine and dandy. I've been very surprised how handy it's been. Good luck!




NightGod

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1052
  • Last login:July 26, 2017, 06:59:58 pm
Re: Any AZ BYOACers want to help me out?
« Reply #10 on: July 25, 2006, 11:31:37 pm »
Well, I took a trip to Harbor Freight and got what I need. The only thing I can't seem to find was a 3/32-inch 3 wing slot cutter.
You probably don't want a 3/32 slot cutter. If you are using 3/32 spinned T-molding, you actually want a 1/16th slot cutter so it snugs in there. Check out www.t-molding.com for more info.
$6.75 the hard way-one quarter at a time.

Banacek

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 294
  • Last login:November 08, 2017, 05:01:31 pm
Re: Any AZ BYOACers want to help me out?
« Reply #11 on: July 26, 2006, 05:58:06 am »
Quote from: leapinlew
The flush trim bit is good for a couple things. It's great for cutting plexi. If you plan on using plexi for your marquee or control panel. Also, it's great to cut out patterns you already have. Here is a picture of me cutting with the flush trim bit. What I've done is create what I wanted to cut and used this bit to trace around and create an exact. This is very useful when cutting the sides of your cabinet - you cut 1 side and trace the other with this bit.

I am planning to use plexi, but i have the piece already cut out and ready to go. But I'm still very confused about this whole process. I have the CP piece cut out and the plexi piece cut out as well. I see how you're tracing, but I don't think I need to do that. That being said, I think I'm ordering the bit. I'd rather be prepared than be caught with my pants down. Has anyone else felt just a bit inadequate when it came to woodwork? :)

Banacek

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 294
  • Last login:November 08, 2017, 05:01:31 pm
Re: Any AZ BYOACers want to help me out?
« Reply #12 on: July 26, 2006, 06:02:16 am »
You probably don't want a 3/32 slot cutter. If you are using 3/32 spinned T-molding, you actually want a 1/16th slot cutter so it snugs in there. Check out www.t-molding.com for more info.

See, I was going by the Project Arcade book, which recommended the 3/32 slot cutter. I saw 1/16 solt cutters that I could of got today.

Here's a question: the CP on the cabinet I'm working on is square. What is the best way to work the t-molding to cover the whole CP? Should I round the edges?

fatfingers

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 966
  • Last login:April 17, 2025, 05:26:08 pm
  • Got UltraStiks?™
Re: Any AZ BYOACers want to help me out?
« Reply #13 on: July 26, 2006, 07:20:02 am »
Here's a question: the CP on the cabinet I'm working on is square. What is the best way to work the t-molding to cover the whole CP? Should I round the edges?

Page 385 of the Project Arcade book discusses this and there is a picture on page 386.

My DK low scores
-------------------
1) 180700
2) 165000
3) 162900
4) 162600
5) 158500


W.W.P.M.D.?                                       I'm here to help ... I just don't do it. ™

AMDman13

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 455
  • Last login:April 08, 2023, 09:21:58 pm
  • This Cab is going to be the end of me!!
Re: Any AZ BYOACers want to help me out?
« Reply #14 on: July 26, 2006, 07:44:06 pm »
Little off topic but check this link... Guy is giving away 4 arcade machines. Here in Phoenix area. States that 1 is a Galaga..

Might be worth checking out.. I couldn't bring myself to call as I am already knee deep in my Mame project and didn't want another..

http://phoenix.craigslist.org/for/186454575.html
My old user name was marlborroman13, but I kicked the habit many years ago!

Banacek

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 294
  • Last login:November 08, 2017, 05:01:31 pm
Re: Any AZ BYOACers want to help me out?
« Reply #15 on: July 26, 2006, 09:38:53 pm »
Little off topic but check this link... Guy is giving away 4 arcade machines. Here in Phoenix area. States that 1 is a Galaga..

Might be worth checking out.. I couldn't bring myself to call as I am already knee deep in my Mame project and didn't want another..

http://phoenix.craigslist.org/for/186454575.html


Oh man, I don't have any room, or else I'd be all over that. :( I wish this house had a garage and not a car port.

AMDman13

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 455
  • Last login:April 08, 2023, 09:21:58 pm
  • This Cab is going to be the end of me!!
Re: Any AZ BYOACers want to help me out?
« Reply #16 on: July 26, 2006, 10:08:44 pm »
Quote
Oh man, I don't have any room, or else I'd be all over that.  I wish this house had a garage and not a car port.

I know I'm in the same boat. I hope someone around here bags at least 1!
My old user name was marlborroman13, but I kicked the habit many years ago!

zerocle

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 28
  • Last login:October 18, 2007, 12:45:46 am
Re: Any AZ BYOACers want to help me out?
« Reply #17 on: July 27, 2006, 06:39:21 pm »
I sent him a text asking if he has one, im at work so i cant call, as far as the original topic, im building mine right now, im on the north side, but goto asu adn spend the week in tempe(your not looking for a place to live are you? I have an open room lol) and would be glad to help if you need anything.

More Cowbell

  • Trade Count: (+5)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1006
  • Last login:March 16, 2017, 02:33:49 pm
  • That's just dumb!
Re: Any AZ BYOACers want to help me out?
« Reply #18 on: July 28, 2006, 02:58:37 pm »
As a University of Arizona alum, I am not allowed by law to help you. I am only allowed to point and laugh at your lack of tools.  :laugh2:
Plus, I live in Chicago now. Good luck though.  :cheers:
I've got a fever...

Banacek

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 294
  • Last login:November 08, 2017, 05:01:31 pm
Re: Any AZ BYOACers want to help me out?
« Reply #19 on: July 28, 2006, 05:15:12 pm »
haha, by law I would have denied your help anyway, then mocked you for being a Wildcat :P

AMDman13

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 455
  • Last login:April 08, 2023, 09:21:58 pm
  • This Cab is going to be the end of me!!
Re: Any AZ BYOACers want to help me out?
« Reply #20 on: July 28, 2006, 10:38:38 pm »
Please tell me someone bagged one of those orginal cabs!
My old user name was marlborroman13, but I kicked the habit many years ago!

zerocle

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 28
  • Last login:October 18, 2007, 12:45:46 am
Re: Any AZ BYOACers want to help me out?
« Reply #21 on: July 29, 2006, 01:04:42 pm »
Please tell me someone bagged one of those orginal cabs!
I tried, and no dice :-(

haha, by law I would have denied your help anyway, then mocked you for being a Wildcat :P
SUN DEVILS!!!!!! lol, jk, but seriously, asu is better :-)