WTB 6-pin molex connector

[sdrob04]

I have the following trackball...

http://www.happcontrols.com/trackballs/560110xx.htm

...and would like to keep the existing AMOA harness intact (i.e. not hack it off).  I need a 6-pin female molex (with metal inserts) to plug into the existing connector on the factory harness. 

Does anyone have one of these connectors they could sell?

[Q*Bert_OP]

If not, try Radio Shack...they sell just that side separately,with pins...

[shardian]

For my trackball, the radio shack molex did not match up with the existing plug. I just went ahead and bought a matching set, and switched out the existing plug for a new one.
Good luck

[sdrob04]

Thank you for the warning on the Radio Shack plug!  I would not have expected more than one version of a 6-pin female molex connector.  The male/female combo seems like the way to go in this case.

[TheRed]

oh no, molex pins come in a TON of different types. The astro city cabinet's being the hardest for me to find. I have a shop local to me called HSC and they have just about every type you could think of....

...except the right size of the Astro City type

[kiddk1]

try this http://groovygamegear.com/webstore/index.php?main_page=product_info&cPath=76_85&products_id=261
it is a female end with a cable to it kind of like the ata hard drive cable but smaller.