Author Topic: routing control panel (Read 1448 times)

gtnshape · « **on:** March 07, 2003, 11:45:34 am »

Does anyone know what the proper counter-sink depth is for joysticks on 3/4" plywood?

Auntie MAME · « **Reply #1 on:** March 07, 2003, 12:05:38 pm »

I routed out the bottom on 3/4 MDF so that the joy stick base was flush with the MDF. The height of the stick is perfect.

rhd · « **Reply #2 on:** March 07, 2003, 12:18:39 pm »

I have a 3/4" CP with 1/8" lexan and routed out 1/4" for the joystick. So the CP over the joystick is 1/2" thick.

gtnshape · « **Reply #3 on:** March 07, 2003, 12:34:31 pm »

Thanks so much 1/4" it is!


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news