Author Topic: 19" WG 6100 to 25" ?'s (Read 1219 times)

b_koenig · « **on:** June 01, 2006, 10:41:03 pm »

I'm looking to do this project with a new 25" tube. 1st, where can I get a new 25" tube at the best price to do this with? Also, is there a post or webpace where I can get instrustions on doing this swap?

Ken Layton · « **Reply #1 on:** June 02, 2006, 09:46:56 am »

There are no 25" vector monitors. The circuitry (and yoke) was never designed for nor intended to drive a 25" tube.

dabone · « **Reply #2 on:** June 02, 2006, 11:54:29 am »

Quote

There are no 25" vector monitors. The circuitry (and yoke) was never designed for nor intended to drive a 25" tube

Amplifone made a 25" used in SW cockpits.

The Amplifone 25

Ken Layton · « **Reply #3 on:** June 02, 2006, 11:54:31 pm »

We never had any Star Wars cockpits on our route. I never knew they existed. I have never seen a 25" vector monitor. We had plenty of those crappy 19" Amplifone monitors. I ended up throwing every one of those Amplifones in the garbage back when they first came out. They were so troublesome that we ended up replacing them with Wells-Gardner vector monitors.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: 19" WG 6100 to 25" ?'s (Read 1219 times)

b_koenig

19" WG 6100 to 25" ?'s

Ken Layton

Re: 19" WG 6100 to 25" ?'s

dabone

Re: 19" WG 6100 to 25" ?'s

Ken Layton

Re: 19" WG 6100 to 25" ?'s