Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Useful for a cabinet?  (Read 846 times)

0 Members and 1 Guest are viewing this topic.

djll

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 84
  • Last login:September 28, 2009, 04:26:13 pm
  • I'm a llama!
Useful for a cabinet?
« on: May 27, 2006, 03:49:24 pm »
Here's something people might find useful for their cabs.  If not, disregard, but I hope this helps someone:

http://www.amazon.com/gp/product/B000639KZM/ref=nosim/104-2075084-9907939?n=468642

crashwg

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3076
  • Last login:May 24, 2019, 11:01:05 am
Re: Useful for a cabinet?
« Reply #1 on: May 27, 2006, 04:06:35 pm »
Survey says...

** out of *****

"This controller is not very good. The recption doesn't go anywhere near the 30 ft mentioned. If you tilt the controller while playing you lose connection. The responsivness is not very good. This product is not worth it."

That's the one and only review of this product though so perhaps it was a defective one.
If there's bees in the trap I'm catching em
By the thorax and abdomen
And sanding the stingers down to a rough quill
Then I dip em in ink, and I scribble a bit
But if it they wriggle then I tickle em until they hold still
Lemme say it again
In my land of pretend
I use bees as a mf'n pen