Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Star Wars Mame needs calibration ???  (Read 6501 times)

0 Members and 1 Guest are viewing this topic.

Luigi

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 612
  • Last login:April 05, 2021, 11:28:40 am
  • Collecting/restoring cabs
Star Wars Mame needs calibration ???
« on: May 26, 2006, 01:25:47 am »
Hi.

Since finding an original Star Wars yoke is almost like searching glasses in the ocean I made my on one using a Road Riot steering wheel. Works very fine.

There's just one point with Star Wars: the ship always flies to the left without touching the yoke. I found the attached screenshot that showed me that it's not only my ROM that seems to need "calibration".

Is there a way to bring that crosshair to the middle of the screen where it should be??

Thanks.


horseboy

  • Only Saint has those powers.
  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1562
  • Last login:March 07, 2021, 02:19:14 pm
  • With my last breath, I curse Zoidberg!
Re: Star Wars Mame needs calibration ???
« Reply #1 on: May 26, 2006, 02:03:54 am »
Good question. I have seen 2 or 3 threads about this same issue. They have reported that it is a little bit off to the left. Most have said that it doesn't affect gameplay much if at all. I haven't seen a fix for this, though. That doesn't mean that it hasn't been fixed, but I haven't seen it.


Quote from: saint
saint is all powerful.

Apparently he is.

Luigi

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 612
  • Last login:April 05, 2021, 11:28:40 am
  • Collecting/restoring cabs
Re: Star Wars Mame needs calibration ???
« Reply #2 on: May 26, 2006, 03:14:11 am »
Most have said that it doesn't affect gameplay much if at all.


Thanks.....

Of course it affects gameplay. I always have to "compensate" that auto-left-drift  ::)

I'll keep on searching.

I know someone from Italy who is a Mame-Developper...maybe he'll know something. I will let the community know if I get something about it.


 

horseboy

  • Only Saint has those powers.
  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1562
  • Last login:March 07, 2021, 02:19:14 pm
  • With my last breath, I curse Zoidberg!
Re: Star Wars Mame needs calibration ???
« Reply #3 on: May 26, 2006, 10:02:23 am »
Please do. :cheers:


Quote from: saint
saint is all powerful.

Apparently he is.

Kremmit

  • - AHOTW -
  • Wiki Contributor
  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3165
  • Last login:June 17, 2025, 04:07:55 pm
  • Who the heck is that?
Re: Star Wars Mame needs calibration ???
« Reply #4 on: May 28, 2006, 02:37:55 pm »
Since finding an original Star Wars yoke is almost like searching glasses in the ocean I made my on one using a Road Riot steering wheel. Works very fine.

Would you care to show off your DIY yoke?  I'd love to see how you built the Y-axis section.

As to your calibration troubles- do they affect other games as well, or is the problem specific to Star Wars?  If it's a global problem, then maybe you can adjust your pots.  But if it's specific to SW, then you'll need a software fix.

southpaw13

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 832
  • Last login:August 02, 2025, 09:36:54 am
  • Whatever!
Re: Star Wars Mame needs calibration ???
« Reply #5 on: May 28, 2006, 09:18:14 pm »
I was under assumption that a Star Wars Yoke needs to be calibrated every time you start a game.  All you have to do is go around in a circle (full motion) before you start a game.  Works for me...


Luigi

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 612
  • Last login:April 05, 2021, 11:28:40 am
  • Collecting/restoring cabs
Re: Star Wars Mame needs calibration ???
« Reply #6 on: May 29, 2006, 04:58:52 am »
@kremmit: due to a ide-controller failure on my motherboard many of my pictures are lost. I will make new ones and explain how I made the Y-axis.

@southpaw: I tried to calibrate but it seems that it cannot be saved. When calibration is done the game resets and the "offset" is back.

It's only Star Wars, other games like Outrun oder Buck Rogers work perfectly.


horseboy

  • Only Saint has those powers.
  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1562
  • Last login:March 07, 2021, 02:19:14 pm
  • With my last breath, I curse Zoidberg!


Quote from: saint
saint is all powerful.

Apparently he is.

Luigi

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 612
  • Last login:April 05, 2021, 11:28:40 am
  • Collecting/restoring cabs
Re: Star Wars Mame needs calibration ???
« Reply #8 on: August 16, 2006, 09:03:09 am »
I was under assumption that a Star Wars Yoke needs to be calibrated every time you start a game.  All you have to do is go around in a circle (full motion) before you start a game.  Works for me...




Finally I tried the mentioned procedure and it worked very fine :)

I moved the yoke in each direction and the crosshair was centered.


Playing is now much easier ;)

Thanks a lot!!


u_rebelscum

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3633
  • Last login:April 21, 2010, 03:06:26 pm
  • You rebel scum
    • Mame:Analog+
Re: Star Wars Mame needs calibration ???
« Reply #9 on: August 16, 2006, 01:44:19 pm »
It is definitely a star wars specific problem.

Not a real problem: it's called correct emulation.

I'd quote, but I'll just link instead.
Robin
Knowledge is Power

Luigi

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 612
  • Last login:April 05, 2021, 11:28:40 am
  • Collecting/restoring cabs
Re: Star Wars Mame needs calibration ???
« Reply #10 on: August 21, 2006, 09:37:40 am »
Since finding an original Star Wars yoke is almost like searching glasses in the ocean I made my on one using a Road Riot steering wheel. Works very fine.

Would you care to show off your DIY yoke?  I'd love to see how you built the Y-axis section.

As to your calibration troubles- do they affect other games as well, or is the problem specific to Star Wars?  If it's a global problem, then maybe you can adjust your pots.  But if it's specific to SW, then you'll need a software fix.


Since I received several questions about the Road Riot thing I decided to make this part of my homepage.

www.thludwig.de/yoke_bau_en.htm

Please don't "roll over the floor laughing" about my english. Instead of that help me improve it :)



ahofle

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4544
  • Last login:August 30, 2023, 05:10:22 pm
    • Arcade Ambience Project
Re: Star Wars Mame needs calibration ???
« Reply #11 on: August 21, 2006, 11:47:04 am »
Your english is better than the majority of Americans'.  :'(

Luigi

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 612
  • Last login:April 05, 2021, 11:28:40 am
  • Collecting/restoring cabs
Re: Star Wars Mame needs calibration ???
« Reply #12 on: August 22, 2006, 02:52:22 am »
Your english is better than the majority of Americans'.  :'(

You must be kidding  :o


NightGod

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1052
  • Last login:July 26, 2017, 06:59:58 pm
Re: Star Wars Mame needs calibration ???
« Reply #13 on: August 22, 2006, 02:55:53 am »
He's not...there is alot of truly awful English floating around this country. ALOT.
$6.75 the hard way-one quarter at a time.

Outrun

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 32
  • Last login:September 23, 2006, 08:41:54 am
Re: Star Wars Mame needs calibration ???
« Reply #14 on: August 22, 2006, 03:56:12 pm »
Hi Luigi,

I was wondering.....the pictured arcade cab you have used in your yoke project, is it/was it a Zaccaria Crazy Kong or Zaccaria Scramble cab ?? If so, would you mind explaining how you have mounted the PC Monitor?

Apologies if this is off topic with the original post. Please feel free to PM me if you have the time.

Many thanks in advance.

My wife doesn't understand !!

Luigi

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 612
  • Last login:April 05, 2021, 11:28:40 am
  • Collecting/restoring cabs
Re: Star Wars Mame needs calibration ???
« Reply #15 on: August 23, 2006, 02:42:39 am »
Hi Outrun...you have PM :)


Luigi

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 612
  • Last login:April 05, 2021, 11:28:40 am
  • Collecting/restoring cabs
Re: Star Wars Mame needs calibration ???
« Reply #16 on: August 28, 2006, 04:44:56 am »
I did some "design" for that blank cover.

Thanks to Localarcade for the example. I made one looking like the original overlay in teh Star wars machine....hope you like it :)


Outrun

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 32
  • Last login:September 23, 2006, 08:41:54 am
Re: Star Wars Mame needs calibration ???
« Reply #17 on: August 28, 2006, 09:26:52 am »
Looking damn fine Luigi.  Bet it's amazing to play with.

Regards

Outrun

p.s Thanks for all the advice via PM...Much appreciated  :cheers:
My wife doesn't understand !!

Luigi

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 612
  • Last login:April 05, 2021, 11:28:40 am
  • Collecting/restoring cabs
Re: Star Wars Mame needs calibration ???
« Reply #18 on: August 28, 2006, 10:19:09 am »
Thanks...and feel free to ask any further question :)


It's really fun playing Star Wars and Empire strikes back......but hey.....I really have to use bigger screen ;D

I have also found some futuristic racers. They only go left/right but I use the forward/backward for increasing/decreasing speed. Needs some practice but very funny and exciting :)

And I really have to install a steel rope or will have it ripped apart some day  :'(

« Last Edit: August 28, 2006, 10:23:24 am by Luigi »

XtraSmiley

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 958
  • Last login:November 02, 2024, 06:07:19 pm
  • Kill the Big Dog
Re: Star Wars Mame needs calibration ???
« Reply #19 on: August 28, 2006, 07:18:11 pm »
He's not...there is alot of truly awful English floating around this country. ALOT.

Definitely.  For instance the word "alot" does not exist, but people tend to use it a lot.

:)  Don't hate me, I couldn't help it!  Don't throw stones in glass houses and all that...
« Last Edit: August 28, 2006, 07:19:54 pm by XtraSmiley »
hearingprotectionBIGDOG@yahooBIGDOG.com

Kill the Dog man.

NightGod

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1052
  • Last login:July 26, 2017, 06:59:58 pm
Re: Star Wars Mame needs calibration ???
« Reply #20 on: August 28, 2006, 11:08:24 pm »
If the worst language crime I'm guilty of is the use of a common misspelling, I'll have no problem sleeping at night ;P
$6.75 the hard way-one quarter at a time.

ChadTower

  • Chief Kicker - Nobody's perfect, including me. Fantastic body.
  • Trade Count: (+12)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 38212
  • Last login:July 30, 2025, 03:29:53 pm
Re: Star Wars Mame needs calibration ???
« Reply #21 on: August 29, 2006, 10:30:06 am »

How about lazy use of a proper if-then clause?  Or leaving out the period?   :laugh2:

NightGod

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1052
  • Last login:July 26, 2017, 06:59:58 pm
Re: Star Wars Mame needs calibration ???
« Reply #22 on: August 29, 2006, 10:43:02 am »
I was wondering if someone would notice the lack of punctuation. :cheers:
$6.75 the hard way-one quarter at a time.