I am looking for some kind of write-up on how to install a Happs trackball. My cp is 3/4 inch wood and I need some help as I've never done this. I have found some pics but it seems that every site that discusses building a cab./cp skips the process of mounting the trackball.
Any help much appreciated.
bah.. hold on this was just discussed last week (and the week before)
*grumble rummage grumble*
rampy
EDIT
how about here?Basically you use the mounting plate (you did buy a mounting plate, right), although eightbit and few others got by without a mounting plate, but mounting plate makes it straightforward how to proceed.
Basically you cut the football shape out of your panel, drill holes for the outer mounting plate bolts/posts. you use the inner bolts/posts to connect the mounting plate to the trackball, then slide in the whole assembly and fasten the mounting plate to the control panel. (of course I assume you have some way of wiring the trackball up) That's the basic gist. If you look at a mounting plate, your trackball, and your control panel it should make sense, but skim those previous threads for interesting info like trackball orientation and flush mounting tips.
Rampy
EDIT2: PS HEY! wait a minute... YOU started the previous thread. arg!