Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Opti-Pac and Windows XP Professional  (Read 1232 times)

0 Members and 1 Guest are viewing this topic.

Mmmbacon

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10
  • Last login:June 29, 2023, 12:24:48 pm
  • I want my own arcade controls!
Opti-Pac and Windows XP Professional
« on: March 03, 2003, 09:47:58 pm »
Received my Optipac today and could wait to wire up my 3" Happs trackball and test it out.  I wired i exactly as it says on Andys site. When I plug it in, I get a "Unrecognizable USB device" error.  I emailed Andy direct, but I though I'd drop a note here also.

System:
Asus P4B Motherboard
1GB RAM
Pentium 4 1.6ghz CPU
Windows XP Professional
Optipac using serial to USB

Thanks!

Mmmbacon

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10
  • Last login:June 29, 2023, 12:24:48 pm
  • I want my own arcade controls!
Re:Opti-Pac and Windows XP Professional
« Reply #1 on: March 04, 2003, 08:20:48 am »
It would help if i set the jumper to USB, DOH!!

Thanks for the prompt reply Andy!