Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: SlikStik Tornado Spinner and Ultimarc Opti-Pac  (Read 2248 times)

0 Members and 1 Guest are viewing this topic.

Santo8742

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 68
  • Last login:September 11, 2015, 06:48:39 pm
SlikStik Tornado Spinner and Ultimarc Opti-Pac
« on: March 30, 2006, 10:51:02 pm »
Newbie here with an interface question.  I just purchased the Tornado Spinner from SlikStik with the new Mini-Pac/Opti-Pac interface cable and I need help hooking it up to the Opti-Pac.  The spinner has four cables connected at the end with a small red connector which I'm assuming is to connect it to the Min-Pac.  I'm guessing I have to cut off the connector and plug each wire into the corresponding spot on the Opti-Pac.  The problem I have is I don't know what the wires are.  The wires are black, yellow, green, and purple and I'm guessing one is ground, one is 5v, one is X1/Y1, and one is X2/Y2 can anyone tell me what wire is what?  Thanks for the help.
Logged

Santo8742

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 68
  • Last login:September 11, 2015, 06:48:39 pm
Re: SlikStik Tornado Spinner and Ultimarc Opti-Pac
« Reply #1 on: May 16, 2006, 02:42:08 pm »
Does anyone have the answer to this?  I don't want to plug the wrong wires in the wrong spots, I think it probably wouldn't be good to plug a power wire into an axis slot.  Any help would be appreciated.
Logged

Havok

  • Keeper of the __Blue_Stars___
  • Trade Count: (+17)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4531
  • Last login:September 08, 2025, 10:54:14 am
  • Insufficient facts always invite danger.
Re: SlikStik Tornado Spinner and Ultimarc Opti-Pac
« Reply #2 on: May 16, 2006, 03:07:17 pm »
I'm more on the GGG side, but try e-mailing their tech support:

info@slikstik.com
« Last Edit: May 16, 2006, 03:09:03 pm by Havok »
Logged

AndyWarne

  • Trade Count: (+18)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1938
  • Last login:April 11, 2021, 03:37:09 am
    • Ultimarc
Re: SlikStik Tornado Spinner and Ultimarc Opti-Pac
« Reply #3 on: May 16, 2006, 03:11:59 pm »
Hopefully this will help:
Logged

Santo8742

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 68
  • Last login:September 11, 2015, 06:48:39 pm
Re: SlikStik Tornado Spinner and Ultimarc Opti-Pac
« Reply #4 on: May 16, 2006, 06:05:36 pm »
That picture was exactly what I needed.  The colors are Black: gnd, Yellow: X2, Purple: X1, and Green: 5v. Thanks Andy.
Logged
Pages: [1]
  
Go Up
« previous next »