Author Topic: TRON JOYSTICK HANDLES (Recasting) PART 1 (Read 72094 times)

Brax · « **Reply #80 on:** August 22, 2006, 06:10:01 pm »

Quote from: CheffoJeffo on August 19, 2006, 02:33:28 pm

If you don't own the handle he borrowed, then he doesn't owe you anything

*Brax saunters past the forum*

CheffoJeffo · « **Reply #81 on:** August 22, 2006, 06:12:13 pm »

Quote from: Brax on August 22, 2006, 06:10:01 pm

Quote from: CheffoJeffo on August 19, 2006, 02:33:28 pm

If you don't own the handle he borrowed, then he doesn't owe you anything

*Brax saunters past the forum*

My drink offer still stands ...

Cheers.

markrvp · « **Reply #82 on:** August 22, 2006, 06:33:58 pm »

Is this a dead project?

It's been 4 days since the update on the lack of updates from the previous 29 days prior to the latest heretofore update.

PoDunkMoFo · « **Reply #83 on:** August 22, 2006, 06:46:18 pm »

The update on the lack of updates sadly is dead

SirPeale · « **Reply #84 on:** August 22, 2006, 07:02:12 pm »

But is the shipping free? And does it work?

markrvp · « **Reply #85 on:** August 22, 2006, 08:20:00 pm »

Quote from: Peale on August 22, 2006, 07:02:12 pm

But is the shipping free? And does it work?

Also, will it fit in my basement?

pointdablame · « **Reply #86 on:** August 22, 2006, 08:52:36 pm »

Quote from: markrvp on August 22, 2006, 08:20:00 pm

Quote from: Peale on August 22, 2006, 07:02:12 pm
But is the shipping free? And does it work?

Also, will it fit in my basement?

also is the basement noisy? And if it is, will the updated handles come stock with the noise code?

Fozzy The Bear · « **Reply #87 on:** August 22, 2006, 10:59:35 pm »

Quote from: pointdablame on August 22, 2006, 08:52:36 pm

Quote from: markrvp on August 22, 2006, 08:20:00 pm
Quote from: Peale on August 22, 2006, 07:02:12 pm
But is the shipping free? And does it work?

Also, will it fit in my basement?

also is the basement noisy? And if it is, will the updated handles come stock with the noise code?

update on the update on the lack of updates and an Update on the update on the noise code........ It's damned noisy....... but not quite as loud as the squeeky sound of an impatient update request.

I might have known you bunch of clowns would hijack this at some point.... Damn!! that's what makes this forum so great after all.

Best Regards,
Julian (Fozzy The Bear)

teef two · « **Reply #88 on:** August 23, 2006, 06:26:27 am »

Damn you Julian, I got all excited for a minute there!

shardian · « **Reply #89 on:** August 23, 2006, 07:30:32 am »

Quote from: Fozzy The Bear on August 22, 2006, 10:59:35 pm

Quote from: pointdablame on August 22, 2006, 08:52:36 pm
Quote from: markrvp on August 22, 2006, 08:20:00 pm
Quote from: Peale on August 22, 2006, 07:02:12 pm
But is the shipping free? And does it work?

Also, will it fit in my basement?

also is the basement noisy? And if it is, will the updated handles come stock with the noise code?

update on the update on the lack of updates and an Update on the update on the noise code........ It's damned noisy....... but not quite as loud as the squeeky sound of an impatient update request.

I might have known you bunch of clowns would hijack this at some point.... Damn!! that's what makes this forum so great after all.

Best Regards,
Julian (Fozzy The Bear)

...So how about an update?

chips4sle · « **Reply #90 on:** September 08, 2006, 12:23:48 am »

hey
i would like to know as well whats up
i could really use about 5 sets of blue and red handles
jeff

NightGod · « **Reply #91 on:** September 08, 2006, 12:54:21 am »

WTF, this isn't done and shipping yet? Julian should be fired from his non-paying job of making these!!!

horseboy · « **Reply #92 on:** September 08, 2006, 01:01:19 am »

Quote from: chips4sle on September 08, 2006, 12:23:48 am

hey
i would like to know as well whats up
i could really use about 5 sets of blue and red handles
jeff

Did you read up more than 1 post? I think I see Fozzy coming....

Outrun · « **Reply #93 on:** September 08, 2006, 01:28:44 pm »

I think we all ought to club up together & send Fozzy a bribe/incentive to getting these out soon

Zeppo · « **Reply #94 on:** October 23, 2006, 03:53:30 pm »

I got $5 to add to the bribe money.

Fozzy The Bear · « **Reply #95 on:** October 23, 2006, 05:20:07 pm »

OK Guys..... It's been a while..... I know you want them but I can't give you much of an update right now.

I'll try and knock out "part two" of the tutorial in the next few weeks. I've not been slacking on these, just busy with other things.

SO! Here's the update as it stands.... We have several sets of molds all completed and ready to rock. Brad has had his original stick returned and again many many thanks to him for the loan item.

I'm happy that we have molds that will produce good casts, but as of yet I'm waiting for the Vacuum Chamber to become free for use... It's busy casting lots of other work related stuff at the moment. I do need to use the Vacuum Chamber, because as it stands right now, the test casts I've been doing are still trapping some air bubbles and we need to try and eliminate, or at the least significantly reduce those.

I'm still not going to post a date, when these will be available off the shelf.... But as soon as I have a further update I will let you know.

Best Regards,
Julian (Fozzy The Bear)

Matth9 · « **Reply #96 on:** October 23, 2006, 09:25:47 pm »

Thanks for the update

Teebor · « **Reply #97 on:** October 24, 2006, 03:53:41 am »

COOL! Keep on rocking Fozzy

MinerAl · « **Reply #98 on:** October 25, 2006, 01:36:36 pm »

vader · « **Reply #99 on:** October 25, 2006, 04:51:09 pm »

are they done yet ? i want to build my Street Fighter cabinets with Tron sticks and use
the trigger for a macro Dragon Punch. your really holding up my progress

FunWithFire · « **Reply #100 on:** October 25, 2006, 08:14:19 pm »

And I want to construct a cabinet using ONLY the tron sticks. I figure I would need about a hundred sets.

Fozzy The Bear · « **Reply #101 on:** October 25, 2006, 08:45:44 pm »

Quote from: FunWithFire on October 25, 2006, 08:14:19 pm

And I want to construct a cabinet using ONLY the tron sticks. I figure I would need about a hundred sets.

Great... I can retire on the proceeds then!

Best Regards,
Julian (Fozzy The Bear)

Havok · « **Reply #102 on:** October 25, 2006, 10:56:46 pm »

Quote from: Fozzy The Bear on October 23, 2006, 05:20:07 pm

I'm waiting for the Vacuum Chamber to become free for use... It's busy casting lots of other work related stuff at the moment.

Work related? What kind of crap excuse is that? Tell your supervisor these are TRON sticks! ! !

southpaw13 · « **Reply #103 on:** October 26, 2006, 11:49:42 am »

Will you be casting other colors? Like red?

Thanks,
Southpaw

Brax · « **Reply #104 on:** October 30, 2006, 12:36:21 pm »

I'm holding out for the solid gold version....

PoDunkMoFo · « **Reply #105 on:** October 30, 2006, 12:55:50 pm »

Quote from: Brax on October 30, 2006, 12:36:21 pm

I'm holding out for the solid gold version....

Hand delivered by Dion Warwick?

Kremmit · « **Reply #106 on:** October 30, 2006, 01:42:21 pm »

Quote from: PoDunkMoFo on October 30, 2006, 12:55:50 pm

Quote from: Brax on October 30, 2006, 12:36:21 pm
I'm holding out for the solid gold version....

Hand delivered by Dion Warwick?

Or Marilyn McCoo..

PoDunkMoFo · « **Reply #107 on:** October 30, 2006, 06:36:24 pm »

And ohhh those Solid Dancers (The female ones).

quarterback · « **Reply #108 on:** November 01, 2006, 12:06:15 am »

Donkey_Kong · « **Reply #109 on:** December 13, 2006, 09:47:14 pm »

Almost 2 months since yer last update. Julian, Watch ya got for us?

Fozzy The Bear · « **Reply #110 on:** December 13, 2006, 09:51:22 pm »

Quote from: Donkey_Kong on December 13, 2006, 09:47:14 pm

Almost 2 months since yer last update. Julian, Watch ya got for us?

More than two months since I've been able to get anywhere near the Vacuum Chamber to do any more tests I'm sorry to say....

So effectively still no updates.... January might be a bit more positive as things are a bit slower on the commercial front. Either that, or I'll have to stop building my current arcade machine and build my own Vacuum Chamber

Best Regards,
Julian (Fozzy The Bear)

leapinlew · « **Reply #111 on:** December 13, 2006, 09:57:29 pm »

BYOVC!

Donkey_Kong · « **Reply #112 on:** December 13, 2006, 10:00:34 pm »

Makes sense. Good luck getting in there after the 1st of the year. I won't need any Tron sticks before then. Just trying to keep the subject simmering anyway. Gonna want to play Tron on my next cabinet for sure. I kept trying & trying to hold onto the Tron concept for my first build, but gave up on it awhile ago. I will have a Tron stick on cab #2...

Later man!

Fozzy The Bear · « **Reply #113 on:** December 13, 2006, 10:00:54 pm »

Quote from: leapinlew on December 13, 2006, 09:57:29 pm

BYOVC!

Is that "Build Your Own Vibrating Chair" Lew??? LOL ROFL

Best Regards,
Julian (Fozzy The Bear)

tranq · « **Reply #114 on:** December 14, 2006, 02:40:22 am »

Hey, D_K, I'm surprised no one (or you) has tried to build something like this:

http://rebirth.dgthompson.com/cppanels.html ; Or, even better, this:

http://arcade.tomvanhorn.com/

WunderCade · « **Reply #115 on:** December 14, 2006, 03:39:11 am »

Is "FAILURE" or a loss of "FIRE IN THE BELLY" over a stalled project too much of a humbling admission for a certain BYOAC'er to confess?

Must YE lead us on...and on...and on...

Enough already.....just tell us a simple "sorry, it ain't gonna happen" so we can go our merry way and move on.

Sometimes the pressure of expectations by peers can make us spin a web to keep up appearances.

Helluva try tho, Julian.

RandyT · « **Reply #116 on:** December 14, 2006, 03:40:52 am »

Quote from: Fozzy The Bear on December 13, 2006, 09:51:22 pm

Either that, or I'll have to stop building my current arcade machine and build my own Vacuum Chamber

Not so bizarre. I actually did this about a year ago. It works really well, but I keep waiting for the 1" thick plexi to implode and kill me when I am standing next to it.

RandyT

Zeppo · « **Reply #117 on:** December 14, 2006, 09:39:37 am »

Great.
After reading back over the thread again, and watching the video on page 2 that I missed somehow the first few times through, I'm getting the urge to try this myself.
My family is full of a lot of do-it-your-self-ers, so I bet I could get some help with this.

Then I found this thread about a home-made vacuum chamber.

http://www.housatonicrr.com/VacChamber.htm

And this document:
http://fusioned.gat.com/images/pdf/BiD_vac_cham.pdf

Hmmmm....maybe it really is doable.

Thanks a lot.
Another project.

EDIT: Well, after a few phone calls and talks with the brothers, it won't be practical for me to attempt any kind of mold making.
Dammit, that would have been cool.

Keep up the great work Fozzy!

More Cowbell · « **Reply #118 on:** December 14, 2006, 10:50:35 am »

Quote from: WunderCade on December 14, 2006, 03:39:11 am

Is "FAILURE" or a loss of "FIRE IN THE BELLY" over a stalled project too much of a humbling admission for a certain BYOAC'er to confess?

Must YE lead us on...and on...and on...

Enough already.....just tell us a simple "sorry, it ain't gonna happen" so we can go our merry way and move on.

Sometimes the pressure of expectations by peers can make us spin a web to keep up appearances.

Helluva try tho, Julian.

That's the spirit! Keep up the encouragement and we'll all have Tron sticks that much faster.

DarkBubble · « **Reply #119 on:** December 14, 2006, 11:01:43 am »

Quote from: RandyT on December 14, 2006, 03:40:52 am

Not so bizarre. I actually did this about a year ago. It works really well, but I keep waiting for the 1" thick plexi to implode and kill me when I am standing next to it.

How much do I have to buy to make it into your will?


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: TRON JOYSTICK HANDLES (Recasting) PART 1 (Read 72094 times)

DarkBubble