Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Putting MAMEWAH in Windows Shell  (Read 1288 times)

0 Members and 1 Guest are viewing this topic.

tibbs68

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 26
  • Last login:June 25, 2006, 03:34:34 am
  • Leave them to me. I will deal with them myself.
Putting MAMEWAH in Windows Shell
« on: May 08, 2006, 03:53:07 pm »
OK have followed the instructions below from the "Hiding XP / Booting to your Emulator / Optimizing boot" thread.

i) Go to your Mamewah folder and edit your mamewah.ini file
ii) Near the bottom of the list of options is app_to_run_on_exit  enter explorer.exe next to it and save the file.
i) Start Menu->Run and enter regedit
ii) Navigate to the item HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\IniFileMapping\system.ini\boot
iii) If there is an item in there called Shell right-mouse click and select modify
iv) Change the first three letters from SYS to USR
v) Navigate to the item HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Winlogon
vi)  Right-mouse click "Winlogon" and select New->String Value
v) Name it Shell then right mouse click Shell and select modify and enter the full path to your Mamewah executeable eg. c:\emu\mamewah\mamewah.exe

Confident that I've followed these instructions to the letter but now I get the Windows Welcome screen followed by a black screen with the cursor & no MAMEWAH!

How bad is this? Give it to me straight! :cry:


exiges

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 23
  • Last login:November 24, 2006, 02:57:03 pm
Re: Putting MAMEWAH in Windows Shell
« Reply #1 on: May 08, 2006, 04:23:10 pm »
In my system Mamewah is c:\emu\mamewah\mamewah.exe  Therefore that's the path I put in the FAQ

Maybe Mamewah on your system is in a different folder ?

jelwell

  • Wiki Master
  • Trade Count: (0)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 460
  • Last login:December 24, 2014, 03:47:21 pm
  • I'm a llama!
Re: Putting MAMEWAH in Windows Shell
« Reply #2 on: May 08, 2006, 06:55:58 pm »
the black screen with cursor sounds like mamewah is running but that your mamewah configuration isn't working properly.

Try to exit MAMEWAH the way you normally would: hopefully windows will launch.
Otherwise Hit CTRL-ALT-DELETE, if mamewah is running kill it.
Then click on the left most tab in the task manager window (can't recall what it's called) and click on new task then type in explorer and hit enter. If you can't see your mouse in task manager you can tab around use the tab key alot and the arrow keys.
Joseph Elwell.

escher

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 162
  • Last login:May 28, 2021, 12:18:21 am
  • Out of the game for way too long
Re: Putting MAMEWAH in Windows Shell
« Reply #3 on: May 08, 2006, 09:32:26 pm »
I had to turn off the "Welcome" screen in XP before it would boot into MAMEWah as the shell.  That's actually a normal setting under the "Users" options, though I don't remember exactly what it was.