Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: artwork/graphics/stickers/vinyls....  (Read 1364 times)

0 Members and 1 Guest are viewing this topic.

nondo

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
  • Last login:March 20, 2010, 01:42:48 pm
artwork/graphics/stickers/vinyls....
« on: May 04, 2006, 06:33:36 pm »
i am in some need of info plz,
i have this CP .........
and would like to get this overlay/graphic mounted onto it...



to look like this...................
what is the best way to go about it.?
the panel is MDF so what prep work is needed for which way i do it?
i would like to cover the CP with perspex/lexan/plexiglass to protect it.
i live in the UK

cheers     :cheers:

 
Logged

GoPodular.com

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 250
  • Last login:April 23, 2008, 10:09:55 pm
    • GOPODULAR!
Re: artwork/graphics/stickers/vinyls....
« Reply #1 on: May 04, 2006, 06:59:56 pm »
If you're going to cover it with plexi/lexan, I'd print it at home on heavyweight paper and then have it laminated.
Logged

miles2912

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 706
  • Last login:October 31, 2019, 05:30:24 pm
  • My first Home Game. Fairchild System F.
Re: artwork/graphics/stickers/vinyls....
« Reply #2 on: May 04, 2006, 07:07:17 pm »
Just scale the graphics to the size of your CP.  Depending on the format it will scale good or bad.. I would just print it out on an Ink Jet printer or have a local copy/print shop do it.  Rough up the CP top with some sand paper then clean with a damp cloth.  Spray with some 3M 77 - or something similiar and lay down the arwork.  Putting on the Pexi overlay will protect it.

Cheers from the good ole USA.

Don
Logged
  Scratch built upright MAME Cab
Pages: [1]
  
Go Up
« previous next »