Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Wiring Up a Coin Mech with credit baord to PC  (Read 1508 times)

0 Members and 1 Guest are viewing this topic.

lettuce

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1900
  • Last login:December 31, 2021, 01:46:10 pm
  • Make It So!
Wiring Up a Coin Mech with credit baord to PC
« on: April 22, 2006, 05:55:56 am »
Now ive done this before with my old converted Jamma cab, but when i build my new cab there will be no Jamma Harness, and thus will not have a J-PAC. So how do i wire a coin mech and credit baord so that it works with mame, am i able to run the wires from the coin mech and credit board to a I-PAC, GPWIZ-49 or Keywiz??

lettuce

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1900
  • Last login:December 31, 2021, 01:46:10 pm
  • Make It So!
Re: Wiring Up a Coin Mech with credit baord to PC
« Reply #1 on: April 22, 2006, 02:29:24 pm »
Anybody?

miles2912

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 706
  • Last login:October 31, 2019, 05:30:24 pm
  • My first Home Game. Fairchild System F.
Re: Wiring Up a Coin Mech with credit baord to PC
« Reply #2 on: April 22, 2006, 04:13:58 pm »
Coin door is just a switch.  It wires like any other cherry/leaf switch.  Run the wire that says "coin" from your KB emulator to the switch on the door and then hook it into the common ground.  Very simple.

The blue wire is ground and the white wire goes to the encoder.  Notice how they daiseychain.



Don

  Scratch built upright MAME Cab

lettuce

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1900
  • Last login:December 31, 2021, 01:46:10 pm
  • Make It So!
Re: Wiring Up a Coin Mech with credit baord to PC
« Reply #3 on: April 22, 2006, 05:54:18 pm »
Top stuff, nice and simple, cheers Don