Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Tron Spinner help  (Read 1877 times)

0 Members and 1 Guest are viewing this topic.

Hoopz

  • Don't brand me a troublemaker!
  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5285
  • Last login:June 13, 2025, 09:18:32 pm
  • Intellivision Rocks!
Tron Spinner help
« on: March 30, 2006, 04:58:54 pm »
I am trying to remove the knob off of an original Tron spinner.  I have a 1/16 hex key (allen wrench) that seems to fit into the hole and make a good fit with the allen screw but it will not turn.  I don't want to apply too much force and damage anything obviously.

Will someone who has a Tron spinner check to see how their's screws in for me please and share any other advice/thoughts/things NOT to do?     ;D

If the screw is simply stuck, would spraying WD 40 or another type of solvent damage the spinner or CPO?

Thanks!
Logged

CheffoJeffo

  • Cheffo's right! ---saint
  • Wiki Master
  • Trade Count: (+2)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 7784
  • Last login:July 14, 2025, 12:11:49 pm
  • Worthless button pusher!
Re: Tron Spinner help
« Reply #1 on: March 30, 2006, 06:05:57 pm »
That's how I get my knob off  ::) ...

Cheers
Logged
Working: Not Enough
Projects: Too Many
Progress: None

ahofle

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4544
  • Last login:August 30, 2023, 05:10:22 pm
    • Arcade Ambience Project
Re: Tron Spinner help
« Reply #2 on: March 30, 2006, 06:17:59 pm »
Quote from: CheffoJeffo on March 30, 2006, 06:05:57 pm
That's how I get my knob off  ::) ...

Cheers

Heh, perhaps Hoopz should change the subject of the thread to "Need help getting my knob off".  That should bring in the thread views. ;D
Logged

NoOne=NBA=

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2718
  • Last login:July 23, 2011, 08:59:16 am
  • Just Say No To Taito! -Nichibutsu
Re: Tron Spinner help
« Reply #3 on: March 30, 2006, 06:46:54 pm »
The knob itself is held on by a roll pin.
You have to punch it out of there.
I've never had to do that though, so I don't know how easy it is to get it back into place afterward.

I personally wouldn't mess with it.
If you undo the other end of the shaft, it will slide out of the bushing.
Logged

Hoopz

  • Don't brand me a troublemaker!
  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5285
  • Last login:June 13, 2025, 09:18:32 pm
  • Intellivision Rocks!
Re: Tron Spinner help
« Reply #4 on: March 30, 2006, 10:35:41 pm »
Thanks everyone.  NoOne was right.  I thought about that earlier but mistakenly though that taking the knob off was the "right" way while doing it the other way was more complicated.... 

It only took me about 30 seconds to get my knob off from the other end.

Happy now Ahofle?   ;D

I appreciate the help all.   :applaud:
Logged

Havok

  • Keeper of the __Blue_Stars___
  • Trade Count: (+17)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4530
  • Last login:Yesterday at 11:47:56 pm
  • Insufficient facts always invite danger.
Re: Tron Spinner help
« Reply #5 on: March 31, 2006, 09:41:23 am »
Glad to see you got your knob off.

 :laugh2:
Logged

RayB

  • I'm not wearing pants! HA!
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 11279
  • Last login:July 10, 2025, 01:33:58 am
  • There's my post
    • RayB.com
Re: Tron Spinner help
« Reply #6 on: March 31, 2006, 11:10:58 am »
Don't forget to polish it.
Logged
NO MORE!!

PetitMorte

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 332
  • Last login:December 11, 2015, 10:03:43 am
  • . . . - - - . . .
Re: Tron Spinner help
« Reply #7 on: March 31, 2006, 03:40:49 pm »
heeheehee... polished Tron knobs...   :laugh2:  Wasn't there a ... picture...?
Logged
Bitten by the cabinet bug... obsessing ever since.

daywane

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2570
  • Last login:December 26, 2024, 11:02:08 am
  • GRRRR!
Re: Tron Spinner help
« Reply #8 on: March 31, 2006, 04:38:27 pm »

thanks.
 :laugh2:

I need a laugh today.
Logged

Havok

  • Keeper of the __Blue_Stars___
  • Trade Count: (+17)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4530
  • Last login:Yesterday at 11:47:56 pm
  • Insufficient facts always invite danger.
Re: Tron Spinner help
« Reply #9 on: March 31, 2006, 11:27:03 pm »
Quote from: PetitMorte on March 31, 2006, 03:40:49 pm
heeheehee... polished Tron knobs...   :laugh2:  Wasn't there a ... picture...?

This is one time you will see in a thread on this board where we all DON'T want pix...
Logged
Pages: [1]
  
Go Up
« previous next »