Author Topic: Question about line filters. (Read 1369 times)

Witchboard · « **on:** March 26, 2006, 05:00:41 pm »

I'm trying to decide whether I need a line filter or not on a current project. Correct me if I'm wrong, but don't arcade switching power supplies have a line filter built in? Is putting a line filter in a cabinet just benefit the monitor?

SirPeale · « **Reply #1 on:** March 26, 2006, 05:42:12 pm »

They're $3.00 or so. Just get one, you'll be glad you did.

markrvp · « **Reply #2 on:** March 26, 2006, 08:18:08 pm »

Quote from: Peale on March 26, 2006, 05:42:12 pm

They're $3.00 or so. Just get one, you'll be glad you did.

Are they readily available someplace like RadioShack? I know you can get them from Bob Roberts, but I rarely think about ordering one a week ahead of the time I want to install the cab electronics.

Witchboard · « **Reply #3 on:** March 26, 2006, 08:29:54 pm »

It was more of a technical question. I know they are inexpensive and readily available.

RayB · « **Reply #4 on:** March 27, 2006, 10:59:02 am »

If you are using a powerbar as your main AC source, then it probably has a filter in it already.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Question about line filters. (Read 1369 times)

Witchboard

Question about line filters.

SirPeale

Re: Question about line filters.

markrvp

Re: Question about line filters.

Witchboard

Re: Question about line filters.

RayB

Re: Question about line filters.