Dimensions for MegaTouch Needed

[NinjaEpisode]

I'm looking for the side dimensions for a Megatouch machine.  Specifically, I'm curious as to the top half and the bottom half dimensions.

Anybody got a machine around that they can take measurements and post them?

Pic for reference:

[NinjaEpisode]

Near tha bottom bump.

You mean to tell me no one here has a megatouch?  How 'bout some of you pub crawlers?

[NinjaEpisode]

Page 2 bump.  One last plea before I just eyeball it and do it myself.

[mccoy178]

Go to a local bar.  That's how I took the measurements for a GT.  I went in the afternoon when the crowd was small.  BTW, how's the doggy doin'?

[NinjaEpisode]

Go to a local bar.  That's how I took the measurements for a GT.  I went in the afternoon when the crowd was small.  BTW, how's the doggy doin'?

Not a bar hopper per say, but if I have to, I guess that'll be my only option.

As far as the dog, still squirtin....

[Ken Layton]

I strongly suggest you telephone the manufacturer, Merit Entertainment (formerly known as Merit Industries) and visit their site, www.meritind.com

They manufactured the Megatouch series in at least a dozen different cabinets over the years and specifications vary from model-to-model and series within that model. I should know, I service many of them in local taverns.

[NinjaEpisode]

Ken you're 100% right, but...

I don't really care what model it is that I get measurements from as long as it's a cabinet similar to the one posted in the picture above.  It doesn't have to be that exact model, just similar in design as far as the sides go.

[BobA]

Here are all the cabinet specs just where ken said they would be.

http://www.meritind.com/Service%20Center/CabinetSpecs.asp

[NinjaEpisode]

Again, right on the money, already visited that.  I'm obviously not being clear as to my intent.  Those are great dimensions, they aren't specific measurements. 

Example, on the top half of the above picture, what is the length of the front area?

That's cool though, I'll eyeball it and take care of it myself.

Thanks anyways.

[Fat-Johnny]

I got a Megatouch here in the basement.  Give me a day or two, and I'll take some measurements for ya.

FJ

[BobA]

OK now I get it.  Even the full manuals have a blowup of the parts but no measurements.  You would have to guestimate the dimensions.  A real machine and a tape measure has got to be the way to go.

[NinjaEpisode]

I got a Megatouch here in the basement.  Give me a day or two, and I'll take some measurements for ya.

FJ

Hey thanks FJ!

[toasty]

Are you covered yet?  I've got one as well and can send the dimensions your way...

[NinjaEpisode]

I haven't seen them yet.  If you've got 'em I'll take 'em!

Thanks in advance!