Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: question about thickness of the wood for control panel...  (Read 1020 times)

0 Members and 1 Guest are viewing this topic.

bossyman15

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 416
  • Last login:March 05, 2012, 01:35:08 pm
  • I am now building my own arcade controls!
    • Bossyman15 Arcade Pics
question about thickness of the wood for control panel...
« on: March 07, 2006, 06:01:31 pm »
i'm going to start building my 4 player control panel soon. (finally!)

anyway i want to use 5/8 inch MDF for top panel but it would be about 48"x18" plus i will route 1/8 off some of top for flight stick and trackball mount to be flush with top panel and put glass cover on top. will the wood be strong enought to support the weight of controls and people's hands on center of wood?
Logged
My website: www.bossyman15.com Lots of arcade pictures inside!

mccoy178

  • It's hard to work with a straight jacket on
  • Trade Count: (+9)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3127
  • Last login:September 03, 2021, 10:23:42 am
  • Go Bucks!
Re: question about thickness of the wood for control panel...
« Reply #1 on: March 07, 2006, 06:05:05 pm »
It should.  I have added support braces in front of and behind the trackball in two panels I made of 5/8ths mdf.  I knew that it was going to get a good pounding from Golden Tee and it worked perfectly.  Otherwise, I think it would be just fine unless someone karate chops it.  Thats been known to happen. :-X
Logged

bossyman15

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 416
  • Last login:March 05, 2012, 01:35:08 pm
  • I am now building my own arcade controls!
    • Bossyman15 Arcade Pics
Re: question about thickness of the wood for control panel...
« Reply #2 on: March 07, 2006, 06:13:57 pm »
Quote from: mccoy178 on March 07, 2006, 06:05:05 pm
It should.  I have added support braces in front of and behind the trackball in two panels I made of 5/8ths mdf.  I knew that it was going to get a good pounding from Golden Tee and it worked perfectly.  Otherwise, I think it would be just fine unless someone karate chops it.  Thats been known to happen. :-X

you mind posting pic of that?
Logged
My website: www.bossyman15.com Lots of arcade pictures inside!

ShinAce

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 152
  • Last login:January 16, 2007, 07:38:14 pm
  • Building the unbuildable since 2001
Re: question about thickness of the wood for control panel...
« Reply #3 on: March 07, 2006, 07:14:32 pm »
http://sound.westhost.com/sp-boxes.htm

About 1/3 of the way down, you'll see the inside of a speaker box that has been heavily braced.
Logged
An ounce of image is worth a pound of performance.
Pages: [1]
  
Go Up
« previous next »