Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: help Wiring buttons and controllers to JPAC  (Read 942 times)

0 Members and 1 Guest are viewing this topic.

flyinhi007

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13
  • Last login:February 11, 2007, 04:55:22 pm
help Wiring buttons and controllers to JPAC
« on: March 05, 2006, 11:29:54 pm »
Ok i have looked all over the place and cant seem to find a way to wire my jpac to my harness....i looked on ultimarc.com but no luck, does anyone have a clue if i can just add my harness to the buttons or do i need to wire them to the small switches labeled "1SW ...2SW etc...."  id rather just wire through the harness.
is this possible?
Logged

BobA

  • Trade Count: (+14)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5943
  • Last login:July 11, 2018, 09:52:14 pm
  • What Me Worry?
Re: help Wiring buttons and controllers to JPAC
« Reply #1 on: March 06, 2006, 12:08:51 am »
The fingers of the jpac plug into the 56 pin jamma connector on your harness.  The  player 1 and 2 switch inputs are for buttons 4 and above.  player 1/2 4 is also inclueded in the jamma connector.

Logged
Pages: [1]
  
Go Up
« previous next »