Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Anyone got a spare Konami/Centuri Harness?  (Read 918 times)

0 Members and 1 Guest are viewing this topic.

myrmidon

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 48
  • Last login:February 14, 2018, 11:12:04 pm
  • I want to build my own arcade controls!
Anyone got a spare Konami/Centuri Harness?
« on: March 02, 2006, 11:28:12 am »
Hi There,

With all you MAMErs and JAMMArizers out there, do any of you have a spare/old Konami/Centuri harness that you wish to sell/trade/throw away?

I am looking to build a dedicated machine for Konami titles (and with 99% certainty, it will be a Gyruss cabinet - if only I can get my hands on either an old cab or detailled plans/specs), however, I want to wire it with a Konami/Centuri harness, rather than JAMMA.

Thanks
Olaf
Logged

myrmidon

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 48
  • Last login:February 14, 2018, 11:12:04 pm
  • I want to build my own arcade controls!
Re: Anyone got a spare Konami/Centuri Harness?
« Reply #1 on: March 07, 2006, 12:54:56 pm »


So I guess nobody does...   :(
Logged

RayB

  • I'm not wearing pants! HA!
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 11279
  • Last login:July 10, 2025, 01:33:58 am
  • There's my post
    • RayB.com
Re: Anyone got a spare Konami/Centuri Harness?
« Reply #2 on: March 07, 2006, 01:19:49 pm »
Sorry, I need mine.
Logged
NO MORE!!

Dav

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 220
  • Last login:March 29, 2016, 05:39:35 am
Re: Anyone got a spare Konami/Centuri Harness?
« Reply #3 on: March 07, 2006, 01:40:18 pm »
Quote from: myrmidon on March 02, 2006, 11:28:12 am
Hi There,

With all you MAMErs and JAMMArizers out there, do any of you have a spare/old Konami/Centuri harness that you wish to sell/trade/throw away?

I am looking to build a dedicated machine for Konami titles (and with 99% certainty, it will be a Gyruss cabinet - if only I can get my hands on either an old cab or detailled plans/specs), however, I want to wire it with a Konami/Centuri harness, rather than JAMMA.

Thanks
Olaf

No, but you can wire it jamma and I'll sell you a pcb that converts jamma to konami,  Even has jumpers to let you select between different variations of konami pinout to run different boards.
Logged
Pages: [1]
  
Go Up
« previous next »