Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: router bit for T-Molding and for leveling CP  (Read 1285 times)

0 Members and 1 Guest are viewing this topic.

USSEnterprise

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1673
  • Last login:October 11, 2007, 11:15:08 pm
    • USS Odyssey
router bit for T-Molding and for leveling CP
« on: February 24, 2006, 09:33:31 pm »
What size/type router bit would I use for the 3/4" T-Molding at Groovy Game Gear? I have a Ryobi router
« Last Edit: February 25, 2006, 02:58:13 pm by USSEnterprise »
Logged
Proper capitalization is the difference between helping your Uncle Jack off a horse, and helping your uncle jack off a horse.

nostrebor

  • Not enough wit to effectively use this space...
  • Wiki Contributor
  • Trade Count: (+6)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1442
  • Last login:October 04, 2013, 02:02:41 pm
  • SHOCKING!!
Re: router bit for T-Molding
« Reply #1 on: February 24, 2006, 09:36:58 pm »
http://forum.arcadecontrols.com/index.php?topic=24558.0

here is one link. A search for "slot cutter" will bring up 8 meelion more ;)
Logged

MYX

  • Wiki Master
  • Trade Count: (0)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 1527
  • Last login:September 18, 2020, 05:00:22 pm
  • Even Jesus loves Donkey Kong!
    • MYX Digital Blog
Re: router bit for T-Molding
« Reply #2 on: February 24, 2006, 09:51:18 pm »
1/16th. I have a ryobe as well. I love it.
Logged
M    Y    X

BLACKOUT  - Finally rewritten - http://blog.myxdigital.com/
Original BLACKOUT thread - http://forum.arcadecontrols.com/index.php?topic=48239.0

USSEnterprise

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1673
  • Last login:October 11, 2007, 11:15:08 pm
    • USS Odyssey
Re: router bit for T-Molding
« Reply #3 on: February 25, 2006, 02:17:13 pm »
Okay, cool. And what type of bit to make a joystick mounting plate flush with the CP surface? I was gonna use a chisel, but tested it on a piece of ---steaming pile of meadow muffin--- wood, and it came out very, very bad
Logged
Proper capitalization is the difference between helping your Uncle Jack off a horse, and helping your uncle jack off a horse.
Pages: [1]
  
Go Up
« previous next »