Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: 2 GT 97,Bad Dudes Bezel, Battlezone proms, misc JAMMA 4 sale/trade  (Read 1138 times)

0 Members and 1 Guest are viewing this topic.

SteveS

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 26
  • Last login:January 06, 2019, 01:34:26 am
Hi,

I have a bad dudes bezel and a Golden Tee 97 board.

Bad dudes is in FAIR shape.  It has a rip in the bottom right corner and a light soda stain to the left of the Data East log(shown in pic).  You probably won't notice these things once in the machine.

GT 97 works fine BUT when I bought the machine the guy had soldered 2 wires to the jamma connector and ran them to the power supply (shown in picture).  I have no idea why he did this but the games works fine.  I replaced it with a 98 board so I have no use for it.

I also have proms from a Battlezone I once owned.  I'm not that experienced in the whole video game electronics thing so all I can tell you is that I never used them.  They have been in my desk for several years.  Numbers on the 3 small chips are 82s129 on each one then the 2nd number is AI2RC, AI2RC and AH4RC.  Numbers are really small but that's what I can make out.  The big chip says FERRANTI, ULA, 1045E, 8501.  The guy who gave me the chips wrote 74s287 on the plastic container for the 3 small chips.

I found ANOTHER Golden Tee 97. This has Board, Marquee, Manual, Trackball Wire.  I will fire it up later today to make sure it works.  It's about 1 degree outside and that's where it was being stored so I'll wait a few hours for it to warm up.

WWF Superstars JAMMA board.  It played fine when I got the machine which I turned into my first MAME machine.  You can have this for shipping.

Cinematronics World Series boards, power supply and wiring harness.

One more board that I can't identify until later.  A fighting game I think, Contra maybe??  I'll post an update later.

$25 + shipping for GT board or a trade or best offer
$45 + shipping for GT board #2 with Marquee, Manual and Trackball Wire or a trade or best offer.
$5 + shipping for bezel or best offer
$5 per chip + shipping for Battlezone chips or trade or best offer..  I have no idea what they are worth but they are pretty old so maybe hard to find/replace.
$0 + shipping for WWF Superstars or a trade (PM for pics)
$0 + shipping for Cinematronics World Series parts or a trade (PM for pics). 

Pics can been seen at:

http://www.powderperfect.com/public/

I will have more stuff later today and this weekend as I clean out my closet.

thanks,
Steve
« Last Edit: February 18, 2006, 04:28:29 pm by SteveS »

APFelon

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 564
  • Last login:July 04, 2024, 08:51:53 pm
  • Posts: 5922
Re: 2 GT 97,Bad Dudes Bezel, Battlezone proms, misc JAMMA 4 sale/trade
« Reply #1 on: February 18, 2006, 05:32:55 pm »
Contact a user called "Pacmon" about that Superstars board. He'll probably take it.

APf

Fig

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 160
  • Last login:January 21, 2024, 04:39:01 pm
  • (-_-)
Re: 2 GT 97,Bad Dudes Bezel, Battlezone proms, misc JAMMA 4 sale/trade
« Reply #2 on: February 18, 2006, 11:29:50 pm »
Man it would be my luck that a bad dudes bezel pops up when I just bought one on ebay >:(