Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: wire connectors  (Read 1037 times)

0 Members and 1 Guest are viewing this topic.

deadmoney5

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 428
  • Last login:February 03, 2020, 11:02:02 pm
  • I don't feel tardy
wire connectors
« on: December 03, 2005, 03:35:31 pm »
Hey all,

I am gonna connect a p360 to my ipaq board now that I know where to connect the ground and 5v wires.

My question is what kind of connector do I use to connect the wire to the pins?

It must be a pretty small connector!!
Logged

deadmoney5

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 428
  • Last login:February 03, 2020, 11:02:02 pm
  • I don't feel tardy
Re: wire connectors
« Reply #1 on: December 03, 2005, 04:08:45 pm »
and since I am already using the ground pin for the illuminated trackball, I assume I can just splice the ground from the P360 into the same pin connector?
Logged

markrvp

  • ARGHHHHHHHHHHHHH!!!!!!!!!! True Genius!
  • Wiki Contributor
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3353
  • Last login:September 14, 2020, 10:19:57 am
  • NFL Expert
Re: wire connectors
« Reply #2 on: December 03, 2005, 08:33:16 pm »
The pin header on the Ipac uses .100 pin spacing - the same as the pinout on an IDE cable and the same as the pin headers on your motherboard that you connect the power & reset switches to. 

An easy solution to use is a spare CD-Rom internal audio cable.  The connector on that is the correct spacing.
Logged
Pages: [1]
  
Go Up
« previous next »