Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Wanted to buy or borrow: T-molding BIT  (Read 1444 times)

0 Members and 1 Guest are viewing this topic.

Wade

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1639
  • Last login:June 02, 2025, 11:48:57 pm
  • 80's Child
    • Wade's Gameroom
Wanted to buy or borrow: T-molding BIT
« on: January 26, 2003, 11:06:29 am »
I hope nobody minds the cross-post...

This weekend, I finally started cutting the wood for my cabinet.  I was thinking about assembly and I realized I am going to need to route the groove for the T-molding soon (before I can assemble most of the cab).

It seems these bits cost $40 or more, and I don't plan on building another cab later.  So I was hoping someone on this forum could do me a big favor, and either let me borrow their bit, or give or sell me their bit for a good price.  If you are interested in helping me out with this, I will supply a long list of internet references as I have bought and sold many things over the internet over the past couple of years.

Thanks!
Wade

mcleanjoel

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 72
  • Last login:May 26, 2005, 06:56:52 am
Re:Wanted to buy or borrow: T-molding BIT
« Reply #1 on: February 02, 2003, 04:04:00 pm »