Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Midway Coin door dimensions  (Read 3080 times)

0 Members and 1 Guest are viewing this topic.

displacedtexan

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 30
  • Last login:August 20, 2007, 11:13:38 pm
  • I want to build my own arcade controls!
Midway Coin door dimensions
« on: November 19, 2005, 05:57:38 pm »
Great forum guys...

I am in the process of building my first cabinet (it's going to be a cocktail) and have almost finished the construction.

My ebay purchased midway coindoor won't get here until after thanksgiving and I don't want to wait that long to cut the hole for it. 

Anyone know the standard dimensions for a midway coin door removed from a Sea Wolf 2 cabinet?  I have searched unsuccessfully...

Thanks in advance...
Logged

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: Midway Coin door dimensions
« Reply #1 on: November 19, 2005, 06:09:47 pm »
From the 1994 Happ Controls catalog:

12.38" (314mm) wide by 9.88" (251mm) high is what the hole cutout in the cabinet should be.
Logged

displacedtexan

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 30
  • Last login:August 20, 2007, 11:13:38 pm
  • I want to build my own arcade controls!
Re: Midway Coin door dimensions
« Reply #2 on: November 19, 2005, 07:21:19 pm »
Forgive me for the dumb question, but the happ controls catalog lists the correct dimensions for the Midway coin door?

Thanks again for your patience with a newb...
Logged

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: Midway Coin door dimensions
« Reply #3 on: November 19, 2005, 11:21:25 pm »
Yes that is correct. Happ Controls was the final manufacturer of the Midway door. Midway bailed out of manufacturing coin doors and turned it all over to Happ years ago. Happ discontinued the Midway door later. The last catalog I have that shows it is the 1994 edition.
Logged

markrvp

  • ARGHHHHHHHHHHHHH!!!!!!!!!! True Genius!
  • Wiki Contributor
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3353
  • Last login:September 14, 2020, 10:19:57 am
  • NFL Expert
Re: Midway Coin door dimensions
« Reply #4 on: November 20, 2005, 01:39:47 am »
Bubba:

If Ken tells you something, you can take it to the bank.
Logged
Pages: [1]
  
Go Up
« previous next »