Author Topic: BRASS MAME tokens - More available, ORDERING OPEN. (Read 12832 times)

Santoro · « **on:** November 16, 2005, 09:39:29 pm »

Status update 11/23/05
Ordering is open - please see

http://www.arcadetokens.com/html/mame_tokens.html

Status update 11/19/05

This poll was to measure demand.

gsoul · « **Reply #1 on:** November 16, 2005, 09:47:58 pm »

How big are they?

I'm tyring to find tokens about the size of the tokens in your SIG. Similar to an Aussie 20c piece around 28mm. All the arcade machines over here are usually preset for this sized coin, so any smaller coins usually fall through.

I'd be very interested if they were close to the size that I mentioned.

Santoro · « **Reply #2 on:** November 16, 2005, 09:49:18 pm »

.984" I have no idea of the metric equivalent. Sorry

Regor · « **Reply #3 on:** November 16, 2005, 10:18:59 pm »

I missed the first run, would love to get my hands on that token design a few hundred times.

thebrownshow · « **Reply #4 on:** November 16, 2005, 10:30:53 pm »

Absolutely.

Farmboy90 · « **Reply #5 on:** November 16, 2005, 11:44:24 pm »

Will they work with the coin door from Happ?

markrvp · « **Reply #6 on:** November 17, 2005, 12:44:23 am »

I'm definitely in for at least 200 brass.

For those of you asking if these will work in your coin door please see this thread:

http://forum.arcadecontrols.com/index.php?topic=22251.0

Here is the short answer:

siropa · « **Reply #7 on:** November 17, 2005, 01:21:19 am »

as I stated in the other thread, i'd take at least 200 brass.

Goobzilla · « **Reply #8 on:** November 17, 2005, 01:38:00 am »

Quote from: gsoul on November 16, 2005, 09:47:58 pm

How big are they?

I'm tyring to find tokens about the size of the tokens in your SIG. Similar to an Aussie 20c piece around 28mm. All the arcade machines over here are usually preset for this sized coin, so any smaller coins usually fall through.

I'd be very interested if they were close to the size that I mentioned.

.984" is about 25 mm (24.99359999 to be exact

ZeroQuest · « **Reply #9 on:** November 17, 2005, 01:53:26 am »

Count me in.

RetroACTIVE · « **Reply #10 on:** November 17, 2005, 08:25:51 am »

Yup, at least 200

pointdablame · « **Reply #11 on:** November 17, 2005, 12:06:19 pm »

i'd be a maybe. I already have them in nickel, but wouldn't mind some brass. I'm just not sure I need another 200 of em.

If you did like a 50 or 100 set, i'd almost certainly get that.

Flinkly · « **Reply #12 on:** November 17, 2005, 12:38:49 pm »

i'd take 200 of the original byoac....in brass. $:-\$

Harry Potter · « **Reply #13 on:** November 17, 2005, 12:44:28 pm »

How much to ship to Australia?

Edit: Total price for 200 and to Australia is what I should have written.

Mr. Bubblehead · « **Reply #14 on:** November 17, 2005, 01:18:04 pm »

Yes, I need some.

TravistyOJ · « **Reply #15 on:** November 17, 2005, 01:53:54 pm »

Count me in for 200

Santoro · « **Reply #16 on:** November 17, 2005, 07:38:15 pm »

Quote from: Farmboy90 on November 16, 2005, 11:44:24 pm

Will they work with the coin door from Happ?

I saw a post around here somewhere where someone successfully modded the plastic Happ coin mechs to accept tokens.

gdilly · « **Reply #17 on:** November 18, 2005, 08:07:38 am »

200? Brass? Tokens? Would?

I'm definately in. Once you decide to do it or not let me know because I want some!

mow_dee · « **Reply #18 on:** November 18, 2005, 03:54:40 pm »

Hi everyone

This is my first post here and this topic made me register.

I'd like 200 of these tokens - how much to ship to New Zealand?

aumameman · « **Reply #19 on:** November 18, 2005, 07:15:15 pm »

The tokens are about the same size as an Aussie/New Zealand 10c coin but a bit thinner.

Im in for another 200 Brass Mame tokens.

Here is a comparison of size of the token compared to a NZ 10c coin and a US QUARTER

stonge · « **Reply #20 on:** November 18, 2005, 07:54:42 pm »

yes, I'd take 200 in brass.

I'd be REALLY interested in a run of the 2004 BYOAC as well - those were a great design (and I hadn't caught the MAME bug yet). None cooler IMHO...

mow_dee · « **Reply #21 on:** November 19, 2005, 04:49:23 am »

Thanks for the comparison pics aumameman.

I definitely want 200 brass.

matt (dot) nat (at) orcon (dot) net (dot) nz

displacedtexan · « **Reply #22 on:** November 19, 2005, 05:59:41 pm »

Sure... I would prefer 100 but if I could only get 200 I would do it...

weaklink · « **Reply #23 on:** November 19, 2005, 09:52:22 pm »

I'm in...

Santoro · « **Reply #24 on:** November 19, 2005, 10:40:42 pm »

OK, I placed an order for more brass MAME tokens.

siropa · « **Reply #25 on:** November 20, 2005, 01:26:21 am »

awesome! thanks Santoro

aumameman · « **Reply #26 on:** November 21, 2005, 05:52:24 am »

Quote from: mow_dee on November 19, 2005, 04:49:23 am

Thanks for the comparison pics aumameman.

I definitely want 200 brass.

matt (dot) nat (at) orcon (dot) net (dot) nz

No problem. I had the same issue about a year ago when the mame tokens were originally in production but lucky for me I have a US Quarter so I knew roughly the size of the token.

MameMaster! · « **Reply #27 on:** November 21, 2005, 10:30:31 am »

...do you have an "in" at the post office?...I got my tokens super fast. Thanks!!!
MameMaster!

cscon115 · « **Reply #28 on:** November 22, 2005, 09:44:48 am »

I am new here - Hello all and welcome to my first post.

I am wondering about the MAME tokens and I had a few questions. If they have been hashed over in the past, I am sorry.

1) Why the .984 size? I understand they are the most common, but the .900 fit the older machines. I understand the mecks are going to have to be swapped out no matter what. But in old midway boxes (Pac-man - Galaga - gorf) the coin will not physically fit into the silver coin slot (see pic). Happ does not make a replacement that accepts the 25mm coin. So your only option is to Drummel / rotozip, or hacksaw the slot

weaklink · « **Reply #29 on:** November 23, 2005, 01:28:05 pm »

thanks!

Santoro · « **Reply #30 on:** November 23, 2005, 10:26:26 pm »

cscon115, no offense taken. I am always torn when people ask for more generic tokens because there are a lot of (very) generic tokens out there already. That, combined with the fact that I only get a few such requests, and with the minimun orders from the mint, it just seems like it would be risky. I'll give some thought to it though, maybe there is a way to creatively serve the 'vintage'crowd.

As for token size, I honestly cannot forsee making anything other than .984" It is widely accepted as the standard. The modificaiton to the Bally/Midway slot is very minimal from what I hear. It would be illegal to make tokens excactly the size of a quarter, and these are as close as it gets with the mint I use.

Thanks for the input.

missioncontrol · « **Reply #31 on:** November 23, 2005, 11:38:50 pm »

cscon115 I beleive someone had used a drimmel to widden the slot ant it still looked nice I don't recall who it was offhand

siropa · « **Reply #32 on:** November 24, 2005, 12:49:29 am »

I used a dremmel on a couple of coin doors to widen them a bit. took about 20 seconds and unless you look closely, you can't even tell it was done.

cscon115 · « **Reply #33 on:** November 24, 2005, 04:55:21 pm »

Yeah,

PER THE DOOR- I know the mod is minimal - but I have restored cars in the past and I have learned to NEVER EVER modify a part. I just can't do it. I have the ability, but something inside stops me from modding the coin slot. It would be like adding arms to David, or putting a hat on the Mona Lisa. I may end up getting a whole new coin door and put the original in storage.

PER THE SIZE (.984 vs .900)- If I get a new door, the size no longer matters! There are aftermarket doors that do not have the size restrictions the original doors have.

PER THE GENERIC DESIGN - I understand the costs involved with cutting new dies and the run of tokes. It is not cheap and not something to jump into! But if this helps... I would like a generic token that shows the home arcade and celebrates the restoration and home arcades. Other generics just have an eagle and no cash value. No real fun there. In fact - the just plain stink.

Maybe we could take a vote and see if there is any interest in a generic design? I would like to see a slogan like, "reclaiming your youth - one token at a time!" As I said before - I like the game not over back and the BYOAC 05 front. If these could be married (sans the MAME) I think it would be pretty cool.

Thanks!
Dan

Santoro · « **Reply #34 on:** November 24, 2005, 05:43:45 pm »

Just out of curiosity, does anyone know if many quarter mechs can be adapted for .900" tokens as they can for .984"?

Dazz · « **Reply #35 on:** November 25, 2005, 04:54:24 pm »

Just purchased 100. I really don't have a need for 200. The kids would just loose them or take them to Chuck e Cheeses just like I find those in my coin drawer.

Thank you very much for bringing these back!

cscon115 · « **Reply #36 on:** November 26, 2005, 08:34:53 pm »

I have been beating the "Generic Token" thread to death. I hope it has not been an annoyance.

siropa · « **Reply #37 on:** November 26, 2005, 11:51:38 pm »

I like the tokens being branded with mame or BYOAC. i'd never buy generic tokens.

aumameman · « **Reply #38 on:** November 27, 2005, 12:13:35 am »

I think there are too many "generic" style tokens out on the market already. I dont think you'll find the support needed to produce "generic" custom tokens.

quarterback · « **Reply #39 on:** November 27, 2005, 03:58:51 am »

You should also keep in mind that the design process is a little more complicated than a single person coming up with a single idea and then the coins get made. No offense intended, but there are almost as many design ideas as there are people on this board. It's not like the BYOAC tokens appeared out of thin air because one person came up with the "perfect" concept. You'll need a lot more people interested in generic tokens before somebody's willing to invest the time and money into getting thousands and thousands of them made.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Poll

I am considering a re-run of BRASS MAME tokens. Please vote if you would buy 200 at $40 shipped to the US.

Author Topic: BRASS MAME tokens - More available, ORDERING OPEN. (Read 12832 times)