Okay, I'm getting out of vid/arcade collecting altogether.
Going to only keep around pinball. So I have an entire 700 square foot basement area literally full of parts/boards/etc to sell off.
This is wave one.
Everything is located in Branford CT . Preference and bulk deals will be given to anyone interested in coming by my place to sift through everything.
Here's some boards I know I have now. All prices do NOT include shipping, lmk where you are located and I'll work up a quote.
Crystal Castles PCB - labelled working but untested. In cage. $25
P-47 PCB - JAMMA, this board is filthy but worked when I plugged it into my bench. Sits on dipswitch report for a minute then comes up. $25
Centipede PCB - tested on my bench for controls, video and sound. Had no way to test EAROM and can't guarantee it. $45
Tekken 2 PCB - works all the way. $25
Life Force PCB - works all the way. $65
Life Force project board - if I recall, has gfx/sprite issue. $35
Pile of Galaxian parts/project boards - 12 in total - in various states of disrepair. Some have chips robbed. Good repair tech should be able to get at least half working with some elbow grease and a few replaced TTL chips and/or RAM chips. $100 for the lot.
Moon Patrol PCB - I believe one of the colors is missing. Project for the repair type. $30
Akanoid PCB - untested but clean. $20
Large pile of project cherry master type boards. For parts/repair. Some missing eproms / socketed chips. About 20 boards. This is not my forte but I know these boards sell well when you get them working. $100 for the lot.
Two untested Tempest boardsets. I know there are a couple missing RAMs and I believe a mathbox chip? on one. I don't have a vector monitor so I never replaced RAM/chip and tested. Pretty clean though. $75 for both sets.
Metcal SP330 Desoldering station. Works - I get frustrated as you have to empty out the solder collection chamber on the wand every hour or so with heavy use, but it's certainly leagues better than the Radio Shack crap. $100.
Lot of Gorf boards - I believe two cages full of boards. I know each has issues and never touched the stuff. Should be fixable for a good tech. $65
This is just a tiny sample. Tons more coming over the next few weeks. Again, anyone wishing to come by my location to sift through is welcome, and likely to be treated well if cash is brought

I'll take pics of the general area as well in the next day or two.