Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Coin Door problems  (Read 1554 times)

0 Members and 1 Guest are viewing this topic.

neo_virus

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19
  • Last login:January 18, 2007, 05:32:17 pm
  • I'm a llama!
Coin Door problems
« on: September 16, 2005, 05:54:27 pm »
Hey guys,

I apologise this is my billionth post on coin doors but its the area I don't have much of a clue with. Anyways I received the credit board for my coin door and have hooked it up to which it works but I'm getting intermittent issues with it. Basically I have it hooked up to a PC PSU taking 12v from it as well as running a ground wire into it as well. I then hooked up the n/o connection to Coin1 on the IPac as well as running the second ground connection to the second ground on the IPac (I have all the controls going into the first ground).

Anyways its working but sometimes it's not actually registering credits and when I move the coin door slightly or sometime not actually do anything it starts sending LOTS of pulses out as tho its got stuck.
Does anybody have any idea as to whats happing, also do I need to run that second ground into the IPac? Is it likely to be a faulty credit board

Many thanks
Sean
Logged

MameJunkie

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 427
  • Last login:March 19, 2009, 08:23:45 pm
  • Eeeeeeeevil
Re: Coin Door problems
« Reply #1 on: September 16, 2005, 06:40:38 pm »
The 12v for from the PC PSU is only for the lights right?

I would check the wiring and make sure nothing is loose or shorted.
Logged
Teamwork - A group of people running around doing what I say.

RayB

  • I'm not wearing pants! HA!
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 11279
  • Last login:August 18, 2025, 10:59:20 pm
  • There's my post
    • RayB.com
Re: Coin Door problems
« Reply #2 on: September 16, 2005, 07:16:33 pm »
Quote from: MameJunkie on September 16, 2005, 06:40:38 pm
The 12v for from the PC PSU is only for the lights right?

He's talking about one of those electronic coin acceptors.
Logged
NO MORE!!

neo_virus

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19
  • Last login:January 18, 2007, 05:32:17 pm
  • I'm a llama!
Re: Coin Door problems
« Reply #3 on: September 16, 2005, 07:39:17 pm »
Yeah, its an electronic coin mech... Mars ME126 :)
Logged

eggedd2k

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 396
  • Last login:February 14, 2006, 09:38:56 am
Re: Coin Door problems
« Reply #4 on: October 20, 2005, 05:06:08 pm »
sounds like you've got it wired up correctly - it's the same setup as I have.

check the wiring on the credit board to make sure that theres not a short between the NO and COMMON  connectors.
Logged
Pages: [1]
  
Go Up
« previous next »