Author Topic: Act Labs Ligh Gun Hardware Question (Read 912 times)

jcrouse · « **on:** September 03, 2005, 05:23:57 pm »

For those of you that have received you new style Act Labs light gun (like me

), have you give any thought to extending the gun cable. It is a weird 9 pin Mini DIN connector. With the shield that makes ten connections if they're all used. I would like to extend it to the front of my cabinet so I can just plug the gun in like I do my USB game pads. What I'm looking for is ideas for nice connectors. If been to www.mouser.com and didn't come up with anything yet.

John

portwojc · « **Reply #1 on:** September 11, 2005, 10:51:39 pm »

I did some searching and found this page.

http://www.mouser.com/catalog/623/906.pdf

It's very close. Perhaps an email to act labs for info on the connectors would be best...

jcrouse · « **Reply #2 on:** September 11, 2005, 10:54:48 pm »

Thanks. I found a whole bunch of panel mounts.

John


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Act Labs Ligh Gun Hardware Question (Read 912 times)

jcrouse

Act Labs Ligh Gun Hardware Question

portwojc

Re: Act Labs Ligh Gun Hardware Question

jcrouse

Re: Act Labs Ligh Gun Hardware Question