Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Who wants to fabricate a Metal Control Panel  (Read 1350 times)

0 Members and 1 Guest are viewing this topic.

Humanoid

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 16
  • Last login:February 12, 2010, 12:55:13 am
  • I want to Build My Own Arcade Controls!!
Who wants to fabricate a Metal Control Panel
« on: August 19, 2005, 01:32:44 am »
I just finished my custom (as in odd sized) cocktail cabinet.  I currently have wood control panels on it, which I do not care for.  I was supposed to have a guy Custom fabricate 3 panels for me (2 sides and a front)  and I went so far as to make an autocad diagram of the panels for use at his shop.  The panels are not going to get made now. Can any one help me out at a reasonable cost or possible trade?
Thanks!
Logged
My long desired cocktail is moments from completion, I just have to find those moments somewhere!

whammoed

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2310
  • Last login:July 29, 2025, 11:05:33 am
  • Crack don't smoke itself
    • NiceMite
Re: Who wants to fabricate a Metal Control Panel
« Reply #1 on: August 19, 2005, 09:35:16 am »
Do you need the standard "pac man" cocktail shaped panels?  If so what lengths do you need?
Logged

rchadd

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1830
  • Last login:June 10, 2013, 06:14:06 am
  • Made in Cornwall
Re: Who wants to fabricate a Metal Control Panel
« Reply #2 on: August 19, 2005, 09:43:22 am »
arcadeshop.com sell them (least the end ones)



Logged

Humanoid

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 16
  • Last login:February 12, 2010, 12:55:13 am
  • I want to Build My Own Arcade Controls!!
Re: Who wants to fabricate a Metal Control Panel
« Reply #3 on: August 19, 2005, 02:59:41 pm »
They are actually the standard Ms. Pacman shaped panels.  The Dimensions on the front panel are obviously a little different.  The legnths are 12 inches on the ends and 22 inches across the front.
Logged
My long desired cocktail is moments from completion, I just have to find those moments somewhere!

juggle50

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 323
  • Last login:July 18, 2024, 07:25:48 am
  • Your either on the bus or off the bus
Re: Who wants to fabricate a Metal Control Panel
« Reply #4 on: August 20, 2005, 02:01:06 am »
arcade depot is making me a custom pair for me.  The guys name is Scott and he seems pretty cool.
Logged
Pages: [1]
  
Go Up
« previous next »