Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Mounting the Happ Super Topfire (the one with the bright red button on top)  (Read 1283 times)

0 Members and 1 Guest are viewing this topic.

AndyP

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
  • Last login:January 01, 2003, 06:22:30 pm
  • I'm a llama!
Mounting the Happ Super Topfire (the one with the bright red button on top)
« on: January 01, 2003, 06:36:19 pm »
Can anyone explain how I get the joystick separated from the base?  It's not like the competitions, so I'm a little bit confused.  I was thinking I'd need to take off the plunger from the bottome of the stick, but it doesn't seem to want to come out, and I don't want to break it.

Help?
Logged

Silverwind

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 807
  • Last login:September 26, 2022, 12:49:09 am
Re:Mounting the Happ Super Topfire (the one with the bright red button on top)
« Reply #1 on: January 02, 2003, 12:46:07 am »
I only have happ super..  and not the top button..

have you looked at the diagram yet?  It may be able to help..
http://www.happcontrols.com/joysticks/50800010x.htm

Logged

eightbit

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1849
  • Last login:September 07, 2019, 07:38:11 pm
  • My cab is never done...
Re:Mounting the Happ Super Topfire (the one with the bright red button on top)
« Reply #2 on: January 02, 2003, 09:12:11 am »
It looks to me like most other joysticks other than the actuator and the switch for the top bottom. You pull that c-clip at the bottom and the joystick handle should slide up and out.
Logged
My statements are my own opinions. They have the value that the reader gives them. My opinion of my opinion varies between foolish and brilliant and these opinions often change with new information.
Pages: [1]
  
Go Up
« previous next »