Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: anyone do metal control panel?  (Read 958 times)

0 Members and 1 Guest are viewing this topic.

alundra

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 187
  • Last login:February 02, 2009, 09:30:05 pm
  • I want to build my own arcade controls!
anyone do metal control panel?
« on: August 09, 2005, 12:32:18 am »
anyone in here do metal cp, like a neo geo cp..i would like to buy one with six buttons...

jcrouse

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1027
  • Last login:January 09, 2010, 05:53:51 pm
    • CPViewer
Re: anyone do metal control panel?
« Reply #1 on: August 09, 2005, 10:26:00 am »
I am considering the same thing, a metal cp, for my new upright I'm getting ready to build. I want a readuis on the fron edge and it's hard to do with wood. I will probably make them myself. I made all three for my cocktail. There are pics at http://home.comcast.net/~cpviewer. The thing I am worried about is the graphics an whether to put lexan on top or not. I am also wondering about mounting of the tackball. It's pretty easy in a wooden cp.

John

Mr. Bubblehead

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 169
  • Last login:May 16, 2007, 08:49:19 am
  • I use soap.
Re: anyone do metal control panel?
« Reply #2 on: August 09, 2005, 11:11:11 am »
I was just thinking about that yesterday, I thought that it would be cool to make a CP out of that polished diamond-plate aluminum.  That stuff is expensive, though, so I probably won't use it on a full-size cabinet.  Maybe on a small single-player bartop, though.

jcrouse

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1027
  • Last login:January 09, 2010, 05:53:51 pm
    • CPViewer
Re: anyone do metal control panel?
« Reply #3 on: August 09, 2005, 11:20:27 am »
I would thing it would be very tough resting your hands on diamond plate. Also you would have an issue with the controls sitting flush. You would need to spot-face the top of the CP to flush mount the controls.

John

Mr. Bubblehead

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 169
  • Last login:May 16, 2007, 08:49:19 am
  • I use soap.
Re: anyone do metal control panel?
« Reply #4 on: August 09, 2005, 12:02:36 pm »
The polished aluminum diamond plate is actually pretty smooth on the hands as opposed to steel, and yes, the areas around the buttons would have to be faced in order to get them to sit flush.  A flat spade bit in a drill press would take care of that, though.