Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Need 5V from either IPAC4 or OptiPac  (Read 804 times)

0 Members and 1 Guest are viewing this topic.

electricd

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 501
  • Last login:February 14, 2025, 07:59:10 pm
  • I'm not a llama!
Need 5V from either IPAC4 or OptiPac
« on: August 05, 2005, 10:08:21 pm »
Ok, I know I could ask this over at Andy's forums, but you guys are always quick and good to me, so here goes.  I need to get a 5V and GND lead from either an IPAC4 or OptiPac to use to power a small bulb used to light my trackball.  I know that the IPAC has that output (or at least used to) as I used a jumper from it to power my old school optipac.  Can anyone tell me exactly on the board where to get this from?  Thanks in advance!!