Author Topic: Oscar Spinner 4 pin plug (Read 853 times)

nussmier · « **on:** July 25, 2005, 11:01:55 am »

I have an Oscar spinner with the 4 pin plug on spinner board. To start I noticed the 4 pin plug on the board of the spinner has become loose making my spinner operation somtimes eratic. I was thinking of just soldering it but when inspecting it I realized the connecter was cracked a little and might explain why it has worked loose. So my question is where can I get a replacement 4 pin connector for an oscar spinner. The board itself appears to be fine and it is just the plug that is the issue. Any help would be appreciated
Thanks.

MadWRX · « **Reply #1 on:** July 29, 2005, 09:28:22 am »

Not sure of the exact part number, but search Part # 571-6430754 on www.mouser.com to get you in the ballpark.

nussmier · « **Reply #2 on:** July 29, 2005, 03:23:03 pm »

Thanks...


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Oscar Spinner 4 pin plug (Read 853 times)

nussmier

Oscar Spinner 4 pin plug

MadWRX

Re: Oscar Spinner 4 pin plug

nussmier

Re: Oscar Spinner 4 pin plug