Author Topic: Control Panel Ideas Wtd - Pics Inside (Read 1110 times)

eggedd2k · « **on:** July 17, 2005, 01:28:57 pm »

The control panel on my new cab is pretty standard looking - nothing special especially the buttons.

i'd like to change it but i'm concerned about the angled side on the overlay and the control panel top itself. it needs to be angled in order to sit flush to the cabinet. the buttons are in 24mm holes - new buttons for which are pretty hard to come by.

anyone offer any advice of where to go next?

(the angled bit is indicated on the second photo)

CJK · « **Reply #1 on:** July 17, 2005, 02:06:40 pm »

Quote from: eggedd2k on July 17, 2005, 01:28:57 pm

i'd like to change it but i'm concerned about the angled side on the overlay and the control panel top itself.

Minwah · « **Reply #2 on:** July 18, 2005, 07:00:49 am »

I'd take the panel off and just make a new one, you can use whatever buttons etc. you like then. You don't really need to use plexi if you don't want...


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Control Panel Ideas Wtd - Pics Inside (Read 1110 times)

eggedd2k

Control Panel Ideas Wtd - Pics Inside

CJK

Re: Control Panel Ideas Wtd - Pics Inside

Minwah

Re: Control Panel Ideas Wtd - Pics Inside