Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Do they make Jumbo  (Read 1917 times)

0 Members and 1 Guest are viewing this topic.

SOAPboy

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1778
  • Last login:August 01, 2009, 03:36:12 am
  • ..::GeeK::..
Do they make Jumbo
« on: July 15, 2005, 10:12:31 pm »
Push buttons like these

http://www.happcontrols.com/pushbuttons/954002xxxxz.htm

That are NOT light up?

I wanna built a control panel, or just add the buttons to my existing for the game "Got Ca" or whatever its called..

and honestly, 8 bucks PER button, seems a tad steep..

Now, is there another company that has similar, or hell even a size inbetween NORMAL pushbuttons and those "jumbo" ones that arnt lit up..

SOAPboy

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1778
  • Last login:August 01, 2009, 03:36:12 am
  • ..::GeeK::..
Re: Do they make Jumbo
« Reply #1 on: July 16, 2005, 03:35:42 am »
Hate to bump my own thread here.. but its really important :(

cid499

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 11
  • Last login:October 11, 2006, 07:32:30 pm
Re: Do they make Jumbo
« Reply #2 on: July 16, 2005, 03:52:21 am »
Well if you're desperate, cant you just take out the bulb?

SOAPboy

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1778
  • Last login:August 01, 2009, 03:36:12 am
  • ..::GeeK::..
Re: Do they make Jumbo
« Reply #3 on: July 16, 2005, 03:57:14 am »
Well if you're desperate, cant you just take out the bulb?

well. id LIKE to be them to be a little smaller.. but yes if i HAVE to i could.. id rather not tho.. id rather a SOLID color button that isnt 8 bucks a peice because of a lightbulb :(

SOAPboy

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1778
  • Last login:August 01, 2009, 03:36:12 am
  • ..::GeeK::..
Re: Do they make Jumbo
« Reply #4 on: July 16, 2005, 02:20:06 pm »
:(

88mph

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 92
  • Last login:July 30, 2018, 12:17:48 pm
  • I need fuel!
Re: Do they make Jumbo
« Reply #5 on: July 16, 2005, 06:01:56 pm »
You might want to check with some makers of industrial buttons.  They use large non lit buttons for emergency stops on machines all the time.. check out this site for some examples of what I am talking about:

http://www.ab.com/industrialcontrols/products/push_buttons/index.html

You might be able to find a local distributor of industrial electronics that carries a button you may need.  I'm not sure if it will be cheaper than 8 bucks though.  Also, make sure you get a momentary.. sometimes these buttons are the rotate to release type.

Good luck,

88mph

b3atmania

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 209
  • Last login:November 25, 2005, 09:48:57 am
Re: Do they make Jumbo
« Reply #6 on: July 17, 2005, 03:33:26 pm »

Are these the same buttons used on arcade Pop'n Music control panels? I remember them to be much more expensive... Guess I should thank you for bringing this to my attention since I always wanted to build a Pop'n panel.

hooded_paladin

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 229
  • Last login:November 06, 2013, 08:59:01 pm
  • Finch! hahaha
Re: Do they make Jumbo
« Reply #7 on: July 18, 2005, 02:12:21 pm »
Yeah me too.  They used to be like $15 or maybe higher...
There is SO a spoon.

j123vt_99

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 219
  • Last login:August 24, 2006, 09:41:12 am
  • I want to build my own arcade controls!
Re: Do they make Jumbo
« Reply #8 on: July 18, 2005, 03:06:42 pm »
could you buy the clear ones and paint the inside to the color you want?
Pictures of my Missile Command  http://www.nimsu.com/mc/mc.html

SOAPboy

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1778
  • Last login:August 01, 2009, 03:36:12 am
  • ..::GeeK::..
Re: Do they make Jumbo
« Reply #9 on: July 18, 2005, 04:26:21 pm »
could you buy the clear ones and paint the inside to the color you want?

I guess i could.. hell i could handle them being lit up, its non issue, i just didnt want to pay the extra money for some lightbulbs.. :(

hooded_paladin

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 229
  • Last login:November 06, 2013, 08:59:01 pm
  • Finch! hahaha
Re: Do they make Jumbo
« Reply #10 on: July 18, 2005, 05:50:23 pm »
In my uninformed opinion these are as cheap as it gets because these don't sell that much compared to standard pushbuttons.  They were way overpriced before.

How many do you need, anyway?
There is SO a spoon.