Author Topic: Microswitches (Read 753 times)

toyfiend2004 · « **on:** July 07, 2005, 03:13:12 pm »

when purchasing microswitches is the standard .187 or is it .250?

Franco · « **Reply #1 on:** July 07, 2005, 03:14:59 pm »

Tiger-Heli · « **Reply #2 on:** July 07, 2005, 03:19:35 pm »

0.187, but I think some of the Ultimarc products (T-Sticks

) use 0.250.

Franco · « **Reply #3 on:** July 07, 2005, 03:30:47 pm »

Are you sure?

My T-sticks are .187 Maybe some of there other products use .25's or possibly .25's were used originally.

toyfiend2004 · « **Reply #4 on:** July 07, 2005, 03:35:04 pm »

i know on some joysticks like the ones that WICO sells offer a choice. but i thought that it was a .187 standard. thanks.

Tiger-Heli · « **Reply #5 on:** July 07, 2005, 03:46:19 pm »

Are you sure?

Didn't you see the frowny face with the question marks?

Franco · « **Reply #6 on:** July 07, 2005, 03:50:03 pm »

Doh! As per normal im not reading all the info before posting!


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news