Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Is this correct for plexi?  (Read 761 times)

0 Members and 1 Guest are viewing this topic.

BarontheFirst

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 243
  • Last login:April 11, 2023, 07:42:07 pm
  • Locked out of the gameroom again!
Is this correct for plexi?
« on: July 04, 2005, 11:59:52 am »
Is smoked Plexi just a transparent gray acrylic cast sheet? This is at www.professionalplastics.com Cost is about $32 for a 26" x 28.25" piece. If this is correct then please let me know. ty in advance.
« Last Edit: July 04, 2005, 02:47:57 pm by BarontheFirst »
Logged

itguy

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 7
  • Last login:November 10, 2021, 01:27:15 pm
  • Don't take life too seriously, it's not permanent.
Re: Is this correct for plexi?
« Reply #1 on: July 07, 2005, 11:26:22 am »
Yes.

I bought from them.  They're a little slow on the shipping to where I am and shipping was a little expensive.  Their stuff arrived on my driveway as advertised.  I was happy with the purchase.

Check out my Thermoplastic Comparison at Retroblast if you're interested in some more info on this subject.    :)
Logged

tonmazz

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 15
  • Last login:May 02, 2010, 06:55:56 pm
  • I want to build my own arcade controls!
Re: Is this correct for plexi?
« Reply #2 on: July 08, 2005, 12:48:03 am »
Professional Plastics has a perfect smoked Plexi but you have to call to get it.  The offerings in the online store are not really that great, a bit too light.  I got a piece of bronze smoked, item number 2370 Bronze Acrylic, 1/4 inch thick.  I gave my exact measurements and it was absolutely perfect.  Shipping was slow as the last post pointed out but I was very satisfied with the product and customer service.  Hope that helps.
Logged
Pages: [1]
  
Go Up
« previous next »