Author Topic: Using a US Shuttle XPC in UK (Read 913 times)

SteveJ34 · « **on:** June 27, 2005, 12:17:08 am »

I built a Shuttle XPC for a fellow that lives in UK.

The different power requirements didn't strike me until I was about to deliver him to the airport for his return flight this afternoon. Well, I knew it existed but there was no 110/230v switch on the shuttle power supply. It's an SK41G based unit with 200w PS whose label indicates 110~230.

Does that mean its "auto switching" based on input voltage?

I know it has an internal 4amp 250v fuse.....

I've scoured SFF forums and Shuttle tech support trying to confirm whether it is auto switching. All appears that way but I would hate for him to arrive home and blow something out.

I look forward to any and all replies.

StephenH · « **Reply #1 on:** June 27, 2005, 01:25:46 am »

Generally if it states 110~230, it will work and be safe to use in the UK. Being no switch, it probably switches automatically.

SteveJ34 · « **Reply #2 on:** June 27, 2005, 10:36:08 am »

A reply post on another forum seems to confirm that fact.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Using a US Shuttle XPC in UK (Read 913 times)

SteveJ34

Using a US Shuttle XPC in UK

StephenH

Re: Using a US Shuttle XPC in UK

SteveJ34

Re: Using a US Shuttle XPC in UK