Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: I-PAC VE Grounding issue  (Read 1132 times)

0 Members and 1 Guest are viewing this topic.

sc1103

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 332
  • Last login:December 11, 2020, 08:37:35 pm
  • ......
I-PAC VE Grounding issue
« on: June 21, 2005, 09:58:01 pm »
I finally decided to wire up all 7 of my CP buttons to my I-PAC VE (i formerly just had 4 and the joystick). When I have the daisy-chain ground completed, buttons 5,6, and 1A (button 7) do not register, but Start 1, which uses the same ground, does, and if I swap the controls for button 2 and 7, button 2 then registers as button 7 so the connection is good...anyone have any ideas whats wrong  ???
Logged

Tiger-Heli

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5447
  • Last login:January 03, 2018, 02:19:23 pm
  • Ron Howard? . . . er, I mean . . . Run, Coward!!!
    • Tiger-Heli
Re: I-PAC VE Grounding issue
« Reply #1 on: June 22, 2005, 07:55:32 am »
Sounds like it has to be a wiring problem, but . . .
Logged
It's not what you take when you leave this world behind you, it's what you leave behind you when you go. - R. Travis.
When all is said and done, generally much more is SAID than DONE.

CJK

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 263
  • Last login:February 03, 2024, 03:30:12 am
  • All your ROM are belong to us!
Re: I-PAC VE Grounding issue
« Reply #2 on: June 22, 2005, 08:09:31 am »
Did you check continuity of your ground wiring? (I.e., one probe on the first connector in the chain, one probe on the last.) I agree with T-H -- seems like it has to be a wiring issue.

-- Chris
Logged
Underway: Joey's Arcade

sc1103

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 332
  • Last login:December 11, 2020, 08:37:35 pm
  • ......
Re: I-PAC VE Grounding issue
« Reply #3 on: June 22, 2005, 09:09:22 am »
Quote from: CJK on June 22, 2005, 08:09:31 am
Did you check continuity of your ground wiring? (I.e., one probe on the first connector in the chain, one probe on the last.) I agree with T-H -- seems like it has to be a wiring issue.

-- Chris

It could be a wiring issue, it just seems strange as the lst button on the chain, the P1 Start has power.  Im going to try rewiring, it may just be my error. 
Logged
Pages: [1]
  
Go Up
« previous next »