Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: 25 pin connectors & 25 core cables?  (Read 1338 times)

0 Members and 1 Guest are viewing this topic.

OldSchool79

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 42
  • Last login:November 01, 2005, 04:16:57 pm
  • Hello!!
25 pin connectors & 25 core cables?
« on: June 21, 2005, 07:43:53 pm »
I'm considering wiring up a cabinet's control panel using multicore cable with 25 wires, and 25 pin D connectors. Has anyone had success with this, and are there any reasons why I shouldn't do it this way?

EDIT: It's to an IPAC btw.
<insert signature here>

Chris

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4574
  • Last login:September 21, 2019, 04:59:49 pm
    • Chris's MAME Cabinet
Re: 25 pin connectors & 25 core cables?
« Reply #1 on: June 21, 2005, 07:47:48 pm »
I do this.  I took a 25-pin extension cable and cut it in half, so the color coding on both ends would match.  Make sure you use an extension cable; a serial- or parallel-specific cable may not have all 25 pins connected.
--Chris
DOSCab/WinCab Jukebox: http://www.dwjukebox.com

OldSchool79

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 42
  • Last login:November 01, 2005, 04:16:57 pm
  • Hello!!
Re: 25 pin connectors & 25 core cables?
« Reply #2 on: June 21, 2005, 07:56:23 pm »
Good idea, I'm thinking of buying just plain 25 core cable by the metre, but I shudder at the thought of soldering 25 pin connectors. I've done it before for other projects, it takes hours :(
<insert signature here>

NoOne=NBA=

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2718
  • Last login:July 23, 2011, 08:59:16 am
  • Just Say No To Taito! -Nichibutsu
Re: 25 pin connectors & 25 core cables?
« Reply #3 on: June 21, 2005, 08:55:22 pm »
I whacked a SCSI cable in half, and used it on my AKI.
I had the female part off of an old SCSI card to use at the AKI end of it though.
That got me two cables from one.