Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Display Problems  (Read 758 times)

0 Members and 1 Guest are viewing this topic.

Jpod1977

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:June 20, 2005, 11:38:10 am
  • I want to build my own arcade controls!
Display Problems
« on: June 20, 2005, 10:19:07 am »
I have an 8liner board that is displaying in only red color. what caused this was the CMOS battery leaked acid on to the board had to repair some lifted traces and shorted out some resistors repaired the traces and resistors got the board powered up the game plays now but all red. if any one could point me in the direction to find out what is causing this or to find a schematic for this board, or tell me where the video driver IC(s) are it would me helpfull

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: Display Problems
« Reply #1 on: June 20, 2005, 11:17:19 am »
Contact www.8liners.com and they should have schematics/service information on just about any 8liners board.

Jpod1977

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:June 20, 2005, 11:38:10 am
  • I want to build my own arcade controls!
Re: Display Problems
« Reply #2 on: June 20, 2005, 11:38:10 am »
thank ken i be placing an order for some ebay items im about to win so i will ask about then, but i have seen any thing on his web site about schematics