Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Have got a coin door, but what type of mech does it need?  (Read 938 times)

0 Members and 1 Guest are viewing this topic.

eggedd2k

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 396
  • Last login:February 14, 2006, 09:38:56 am
Have got a coin door, but what type of mech does it need?
« on: June 10, 2005, 04:20:43 pm »
i've picked up a coin door the same as this one http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=575&item=6185261263&rd=1&ssPageName=WDVW

it's not got a coin mech.
« Last Edit: June 10, 2005, 04:22:45 pm by eggedd2k »
Logged

eggedd2k

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 396
  • Last login:February 14, 2006, 09:38:56 am
Re: Have got a coin door, but what type of mech does it need?
« Reply #1 on: June 10, 2005, 04:28:13 pm »
by the way i want one that's got a microswitch to register credits
Logged

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: Have got a coin door, but what type of mech does it need?
« Reply #2 on: June 10, 2005, 06:55:39 pm »
Hard to tell you what to get since the only pictures are of the front of the door. All coin doors look alike from the front. We need to see the back of the door.
Logged

eggedd2k

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 396
  • Last login:February 14, 2006, 09:38:56 am
Re: Have got a coin door, but what type of mech does it need?
« Reply #3 on: June 11, 2005, 07:04:43 am »
i'll try and get a photo of it. the guy i got it off said it's a Mars coin door.  it's got two green/orange clip things on the back also if that's any use
Logged

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: Have got a coin door, but what type of mech does it need?
« Reply #4 on: June 11, 2005, 11:00:49 am »
If it's a Mars Electronics door then chances are it is special. I suggest contacting the manufacturer's technical support at www.meiglobal.com
Logged
Pages: [1]
  
Go Up
« previous next »