Author Topic: Lighted Buttons Example (Read 3843 times)

Knievel · « **on:** June 06, 2005, 08:19:05 pm »

Updated my FLYERCADE project thread today. It will be of intrest to those of you caught up in the 'lit button craze' of late, I think it's a very cool effect.

Also a great option if you can't afford to replace your buttons. For the price of some LED's and wire you can breathe new life into that old CP...

whammoed · « **Reply #1 on:** June 06, 2005, 08:29:05 pm »

Cool! Lets see under the panel. Details...

Knievel · « **Reply #2 on:** June 06, 2005, 10:18:11 pm »

Well it's already back on his cabinet so I don't have an underside pic.
It's just 1 superbright white LED per button, pushed into a 3/16" drilled hole in the bottom of the button housing...the trackball has 4.

CJK · « **Reply #3 on:** June 06, 2005, 10:30:33 pm »

Are those standard Happ buttons (with the horizontal microswitch)? I'd love to see an example from the underside or out of the panel.

Where'd you get the LEDs? SuperBrightLEDs.com?

-- Chris

Veinman · « **Reply #4 on:** June 06, 2005, 11:03:36 pm »

That's pretty cool.

froggerman · « **Reply #5 on:** June 06, 2005, 11:09:42 pm »

Great job! Very cool looking. Do you have a picture of how you routed the wires for the LED?

Knievel · « **Reply #6 on:** June 06, 2005, 11:30:20 pm »

Yes standard Happ horizontals. I buy my LED's off eBay, an offshore seller, really cheap and I haven't had a defective one yet.

As I said in the Flyercade thread this is not a new idea. And there will be a lot of people doing this exact thing when the FX Buttons hit the market.

Here's some pics to show you where the LED goes...

Franco · « **Reply #7 on:** June 07, 2005, 01:29:55 am »

Damn it. Why did I buy vertical microswitches?? I guess they wont fit whith those. Ill just have to wait for shawnzillas clear ones, also means I wont be able to transfer the microswitches tho

Chris · « **Reply #8 on:** June 07, 2005, 08:25:57 am »

Quote from: Franco on June 07, 2005, 01:29:55 am

Damn it. Why did I buy vertical microswitches?? I guess they wont fit whith those. Ill just have to wait for shawnzillas clear ones, also means I wont be able to transfer the microswitches tho

ErikRuud · « **Reply #9 on:** June 07, 2005, 08:43:47 am »

I used verticals in my cab.

I posted pictures of them on this page

CJK · « **Reply #10 on:** June 07, 2005, 11:49:34 am »

Quote from: Knievel on June 06, 2005, 11:30:20 pm

Yes standard Happ horizontals. I buy my LED's off eBay, an offshore seller, really cheap and I haven't had a defective one yet.

Great -- thanks!

-- Chris

walls83 · « **Reply #11 on:** June 07, 2005, 11:57:27 am »

anybody have a site on wiring all these LEDs to a power source? Like a step by step guide.

Chris · « **Reply #12 on:** June 07, 2005, 11:59:23 am »

Quote from: walls83 on June 07, 2005, 11:57:27 am

anybody have a site on wiring all these LEDs to a power source?

Franco · « **Reply #13 on:** June 07, 2005, 12:52:29 pm »

Quote from: Chris on June 07, 2005, 08:25:57 am

Quote from: Franco on June 07, 2005, 01:29:55 am
Damn it. Why did I buy vertical microswitches?? I guess they wont fit whith those. Ill just have to wait for shawnzillas clear ones, also means I wont be able to transfer the microswitches tho

Knievel · « **Reply #14 on:** June 07, 2005, 02:52:48 pm »

If you do a search I'm sure you will find more examples of this type of button lighting, I think Erik's might have been the one I originally saw. My intent was to show an entire CP lit up, hopefully inspiring others to try it.

More info on the LED's can be found in my translucent button lighting how-to. I used the same ones in that project.

Flinkly · « **Reply #15 on:** June 07, 2005, 05:54:30 pm »

well, i just had a crazy idea. how does a regular black happs button light up? not well i presume, but one can still ask...

CJK · « **Reply #16 on:** June 07, 2005, 07:40:53 pm »

Quote from: Flinkly on June 07, 2005, 05:54:30 pm

well, i just had a crazy idea.

quarterback · « **Reply #17 on:** June 07, 2005, 09:51:51 pm »

Quote from: CJK on June 07, 2005, 07:40:53 pm

I'm betting not real well.

SOAPboy · « **Reply #18 on:** June 07, 2005, 09:58:06 pm »

Id murder to have someone help me make that nice of a CP..

Chris · « **Reply #19 on:** June 07, 2005, 10:00:10 pm »

Quote from: quarterback on June 07, 2005, 09:51:51 pm

Quote from: CJK on June 07, 2005, 07:40:53 pm
I'm betting not real well.

Knievel · « **Reply #20 on:** June 07, 2005, 10:15:43 pm »

Quote from: SOAPboy on June 07, 2005, 09:58:06 pm

Id murder to have someone help me make that nice of a CP..

Good to know

Seriously though I have done a couple of CP's for people here...only within Canada so far.

CJK · « **Reply #21 on:** June 07, 2005, 10:50:10 pm »

Quote from: quarterback on June 07, 2005, 09:51:51 pm

Quote from: CJK on June 07, 2005, 07:40:53 pm
I'm betting not real well.

SOAPboy · « **Reply #22 on:** June 07, 2005, 11:21:51 pm »

Quote from: Knievel on June 07, 2005, 10:15:43 pm

Quote from: SOAPboy on June 07, 2005, 09:58:06 pm
Id murder to have someone help me make that nice of a CP..

Good to know

Seriously though I have done a couple of CP's for people here...only within Canada so far.

To bad shipping would litterally kill me..

really need to find someone locally thats good with wood to help with this cab i have.. right now its just a crap peice of wood and theres a stupid gap.. damn metal CPs.. $:-\$

Tahnok · « **Reply #23 on:** June 08, 2005, 04:11:45 am »

Quote from: CJK on June 07, 2005, 10:50:10 pm

Quote from: quarterback on June 07, 2005, 09:51:51 pm
Quote from: CJK on June 07, 2005, 07:40:53 pm
I'm betting not real well. I'm using black buttons for my admin functions right now, but I'm going to end up switching them to shawnzilla's clear buttons when they are available. Then I'll light 'em up.

You gonna' light them up with black leds?

Nope: a black light, of course.

-- Chris

I'm actually curious about this myself. After seeing this, I think I am just going to buy some normal buttons for my bartop and light them like you did (taking too long to get the trans buttons). But I don't want to use blue buttons on the cab since my stand-up already uses those. And no other colors other than black would fit in with the color scheme. Of course, they would be lit with ultra-bright white or blue LEDs.

shawnzilla · « **Reply #24 on:** June 08, 2005, 04:56:16 pm »

Quote from: tahnok100 on June 08, 2005, 04:11:45 am

Quote from: CJK on June 07, 2005, 10:50:10 pm
Quote from: quarterback on June 07, 2005, 09:51:51 pm
Quote from: CJK on June 07, 2005, 07:40:53 pm
I'm betting not real well.

Knievel · « **Reply #25 on:** June 08, 2005, 05:03:29 pm »

Are you going to have an LED tutorial on your site Shawn?
I'm getting lots of e-mail/pm's asking how I lit these up...the technique is not as well known as I thought.

shawnzilla · « **Reply #26 on:** June 08, 2005, 07:33:09 pm »

Quote from: Knievel on June 08, 2005, 05:03:29 pm

Are you going to have an LED tutorial on your site Shawn?
I'm getting lots of e-mail/pm's asking how I lit these up...the technique is not as well known as I thought.

Probably a good idea. Yes, I will.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news